We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil riser clamp, copper plated steel, 7 inch length

Anvil

Anvil 0500421029 Riser Clamp Trap 3/4 In 7 In

SKU CH-3RAP-F0R50 MPN 0500421029

Copper-plated steel riser clamp supports 3/4-inch copper tube risers up to 75 lb, meeting A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58 standards

  • TypeDrain Components
  • MaterialHAWA
  • Secures 3/4-inch copper tube risers with a 75-pound load rating
  • Copper-plated steel construction resists corrosion for long service life
  • 7-inch length fits standard riser spacing in plumbing installations
  • Meets A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58 Type 8 standards
  • 5/16-inch bolt size allows firm clamping on insulated or non-insulated tubing

Anvil Riser Clamp for 3/4 Inch Copper Tube

The Anvil 0500421029 riser clamp supports and steadies copper tube risers with a 3/4 inch tube size. It accommodates both insulated and non-insulated copper piping in plumbing installations. The copper-plated steel construction provides durability for residential and commercial drain systems. This component is not designed for use with hanger rods.

Copper-Plated Steel Handles Standard Loads

Carbon steel with copper plating delivers reliable strength for vertical pipe support. The clamp carries a maximum load of 75 lb under normal conditions. Bolt size 5/16 inch secures the assembly without specialised tools. Standards A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58 confirm compliance for Type 8 drain components.

7 Inch Length Fits Standard Riser Spacing

Overall length of 7 in determines whether this clamp matches the riser spacing in your plumbing layout. Verify the measurement against your pipe centres before ordering. Builders needing a different reach or a hanger-rod compatible design should select an alternative model.

Highlights

  • Secures 3/4-inch copper tube risers with a 75-pound load rating
  • Copper-plated steel construction resists corrosion for long service life
  • 7-inch length fits standard riser spacing in plumbing installations
  • Meets A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58 Type 8 standards
  • 5/16-inch bolt size allows firm clamping on insulated or non-insulated tubing

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0500421029

Questions about this item

How do I install the Anvil 0500421029 riser clamp on a 3/4 In copper tube, and what step is often missed?

Place the clamp around the tube, insert the 5/16 In bolt, and torque it to the specified value; the step often missed is verifying the copper-plated steel jaws fully contact the tube before tightening.

What maintenance or replacement will the Anvil 0500421029 riser clamp need over time?

Inspect the copper plating for corrosion or wear at each service interval; replace the clamp if the plating is breached or the 5/16 In bolt shows thread damage.

What is the first limit reached on the Anvil 0500421029 riser clamp under sustained load?

The 75 Lb maximum load rating is the primary limit; exceeding it risks deformation of the carbon steel body or bolt failure per ANSI/MSS SP-69.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.