We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Adjustable galvanised steel clevis hanger for half to three-quarter inch pipe

Anvil

Anvil 0500359500 adjustable clevis hanger trap

SKU CH-B0EV-Q9SG0 MPN 0500359500

Adjustable clevis hanger supports 1/2 to 3/4 inch pipe with 610 lb capacity, meeting A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58 standards, UL/ULC listed and FM approved

  • TypeDrain Components
  • MaterialHAWA
  • Adjustable design fits 1/2 to 3/4 inch pipe
  • Carbon steel construction resists corrosion in plumbing systems
  • Supports up to 610 lb maximum load
  • Meets A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58 standards
  • UL, ULC listed and FM approved for safety compliance

Adjustable Clevis Hanger for 1/2 to 3/4 Inch Pipe

The Anvil 0500359500 is an adjustable clevis hanger designed to suspend stationary pipe lines with diameters between 1/2 and 3/4 inch. It accepts a 3/8 inch rod and is built from galvanized carbon steel for corrosion resistance. This hardware suits plumbing and mechanical contractors installing supply or drainage runs in commercial and residential buildings.

Galvanized Steel Construction Meets Multiple

The galvanized carbon steel body provides durability in damp environments while the finish satisfies UL, ULC and FM approval requirements. Compliance with A-A-1192A Type 1, WW-H-171-E Type 1, ANSI/MSS SP-69 and MSS SP-58 Type 1 confirms the hanger meets recognised industry benchmarks for load rating and dimensional tolerances. These certifications simplify specification and inspection on regulated job sites.

Load Rating and Fixed Dimensions Define

A maximum load of 610 lb sets the upper bound for pipe weight, insulation and fluid content combined. The overall length of 2 11/16 inch fixes the vertical space needed between the rod attachment and the pipe centreline. Installers must verify that the rod size, pipe diameter and structural support align with these fixed parameters before committing to the layout.

Highlights

  • Adjustable design fits 1/2 to 3/4 inch pipe
  • Carbon steel construction resists corrosion in plumbing systems
  • Supports up to 610 lb maximum load
  • Meets A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58 standards
  • UL, ULC listed and FM approved for safety compliance

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0500359500

Questions about this item

How often should the galvanized coating on this clevis hanger be inspected for corrosion?

Inspect the galvanized steel finish periodically for white rust or red rust, especially in humid or corrosive environments; replace the hanger if the coating is breached and base metal is exposed.

What is the maximum static load this adjustable clevis hanger can support before deformation?

The hanger is rated for a maximum load of 610 Lb; sustained loads at or near this limit may cause permanent deflection of the carbon steel body.

Does the galvanized finish affect heat dissipation when the suspended pipe carries hot fluid all day?

The galvanized coating does not significantly impede heat transfer from the pipe to the hanger; the carbon steel body will reach temperatures close to the pipe surface during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.