We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil carbon steel pipe clamp, hot-dip galvanised, 13-3/4 inch length

Anvil

Anvil 0500345137 Pipe Clamp 8 In 13-3/4 In L

SKU CH-2VXE-JDA32 MPN 0500345137

Carbon-steel pipe clamp for 8-inch lines, rated to 1,615 lb at 650 °F and 1,440 lb at 750 °F, with hot-dip galvanized finish and UL, ULC, FM approvals

  • TypeDrain Components
  • Supports heavy pipe loads with 1615 lb capacity at 650°F
  • Maintains strength at higher temperatures with 1440 lb rating at 750°F
  • Carbon steel construction provides durability for industrial piping systems
  • Hot-dip galvanized finish resists corrosion in demanding environments
  • Meets multiple industry standards including UL, FM and ANSI/MSS SP-69

Heavy-Duty Pipe Clamp for 8-Inch Lines

This carbon-steel clamp fits an 8-inch pipe and spans 13-3/4 inches in length. It carries a maximum load of 1615 pounds at 650 degrees Fahrenheit and 1440 pounds at 750 degrees Fahrenheit. The hot-dip galvanized finish resists corrosion on cold or uninsulated hot lines.

Installers Meeting SP-69 and Federal Spec A-A-1192A

The clamp meets ANSI/MSS SP-69, MSS SP-58, Federal Specification A-A-1192A and WW-H-171-E requirements. It carries UL, ULC and FM approvals for sizes up to 8 inches. Projects that do not require these specific listings or a 3/4-inch thread size should consider other options.

Load Rating at Temperature Determines Suitability

The 1615-pound capacity at 650 degrees Fahrenheit drops to 1440 pounds at 750 degrees Fahrenheit. Verify the operating temperature and weight of the pipe line against these two figures before specifying this clamp.

Highlights

  • Supports heavy pipe loads with 1615 lb capacity at 650°F
  • Maintains strength at higher temperatures with 1440 lb rating at 750°F
  • Carbon steel construction provides durability for industrial piping systems
  • Hot-dip galvanized finish resists corrosion in demanding environments
  • Meets multiple industry standards including UL, FM and ANSI/MSS SP-69

Specifications

TypeDrain Components
BrandAnvil
Model0500345137

Questions about this item

How do I install the Anvil 0500345137 pipe clamp and what is the common mistake?

Thread the 3/4-inch rod into the clamp body and tighten the hex nuts evenly. The step people get wrong is forgetting to level the 13-3/4-inch clamp body before final torque, which shifts the load off-center.

What maintenance or replacement will this carbon-steel clamp need later?

Inspect the hot-dip galvanized finish annually for white rust or coating damage. Replace the clamp if the carbon steel shows pitting or if the threads on the 3/4-inch rod strip during adjustment.

What limit appears first when this clamp runs at sustained high temperature?

The 1615-pound load rating at 650 degrees F drops to 1440 pounds at 750 degrees F, so the reduced capacity at the higher temperature is the first limit reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.