We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised carbon-steel pipe clamp, 4 inch pipe size, 8-1/2 inch length

Anvil

Anvil 0500345103 Pipe Clamp 4 In 8-1/2 In L

SKU CH-7AK1-7PKPB MPN 0500345103

A 4-inch carbon-steel pipe clamp rated for 1040 lb at 650°F and 930 lb at 750°F, meeting UL, FM and federal specifications

  • TypeDrain Components
  • MaterialHAWA
  • Supports heavy pipe loads up to 1040 lb at 650 °F
  • Retains 930 lb capacity even at 750 °F
  • Hot-dip galvanised carbon steel resists corrosion
  • Meets Federal Spec A-A-1192A and ANSI/MSS SP-69 & SP-58
  • UL, ULC listed and FM approved for safety compliance

Carbon-Steel Pipe Clamp, 4 Inch

This carbon-steel pipe clamp fits a 4-inch pipe and measures 8-1/2 inches in length. It is hot-dip galvanised for corrosion resistance and rated for a maximum load of 1040 lb at 650 °F and 930 lb at 750 °F. The clamp uses a 1/2-inch thread size and is metal-detectable for safety compliance. It meets Federal Specification A-A-1192A Type 4, WW-H-171-E Type 4, ANSI/MSS SP-69 and MSS SP-58 Type 4, and carries UL, ULC and FM approvals.

Suited for uninsulated hot or cold pipe suspension

The clamp is designed for suspending cold pipe lines or hot lines where no insulation is required. It is not intended for insulated piping systems, applications exceeding the stated temperature or load ratings, or installations needing a different pipe diameter or thread specification.

Load and temperature rating

The decisive specification is the maximum load of 1040 lb at 650 °F and 930 lb at 750 °F, which determines whether this clamp can safely support the intended piping system under operating conditions.

Highlights

  • Supports heavy pipe loads up to 1040 lb at 650 °F
  • Retains 930 lb capacity even at 750 °F
  • Hot-dip galvanised carbon steel resists corrosion
  • Meets Federal Spec A-A-1192A and ANSI/MSS SP-69 & SP-58
  • UL, ULC listed and FM approved for safety compliance

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0500345103

Questions about this item

Will the hot-dip galvanized coating need touch-up after years of service?

The hot-dip galvanized finish provides long-term corrosion protection and does not require scheduled recoating under normal conditions.

Does the 1040 lb load rating at 650 °F drop further if the pipe runs hotter?

The rating falls to 930 lb at 750 °F; exceeding that temperature would reduce capacity below the listed values.

How hot does the carbon steel body get when supporting a 4-inch line all day?

The clamp is rated for continuous service up to 750 °F, so surface temperature will track the pipe temperature within that range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.