We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized carbon steel insulation shield for 3-1/2 to 4 inch pipe

Anvil

Anvil 0500340112 Insulation Protection Shield trap

SKU CH-N8G4-S2F2C MPN 0500340112

An insulation protection shield fitting 3 1/2 to 4 inch pipe with 2 inch insulation thickness

  • TypeDrain Components
  • MaterialCarbon Steel
  • Galvanised carbon steel resists corrosion in wet environments
  • 16 gauge thickness provides structural rigidity for pipe support
  • Fits 3½ to 4 inch pipe with 2 inch insulation
  • 12 inch length covers standard insulation runs
  • Meets A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-5 standards

Insulation Protection Shield 10A

The Anvil 0500340112 is a carbon steel insulation protection shield designed for pipe sizes 3 1/2 to 4 inches. It features 16 gauge galvanized construction with a 12 inch length. This component meets A-A-1192A Type 40, WW-H-171-E Type 41, ANSI/MSS SP-69 and MSS SP-5 Type 40 standards.

Suited for standard pipe insulation

This shield suits installers protecting insulation on 3 1/2 to 4 inch piping systems where the referenced MSS and ANSI standards apply. It is not for systems requiring different pipe diameters, insulation thicknesses or alternative gauge materials.

16 gauge galvanized carbon steel

The 16 gauge galvanized carbon steel construction determines durability and corrosion resistance for the intended piping application. This specification decides whether the shield meets the project material requirements.

Highlights

  • Galvanised carbon steel resists corrosion in wet environments
  • 16 gauge thickness provides structural rigidity for pipe support
  • Fits 3½ to 4 inch pipe with 2 inch insulation
  • 12 inch length covers standard insulation runs
  • Meets A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-5 standards

Specifications

TypeDrain Components
MaterialCarbon Steel
BrandAnvil
Model0500340112

Questions about this item

Will the galvanized carbon steel shield need replacement if the zinc coating wears through?

The 16-gauge carbon steel body is galvanized for corrosion resistance; if the coating is breached the steel can rust, so inspect periodically and replace if significant corrosion appears.

What limits how long the shield can support the pipe under continuous load?

The shield is rated to MSS SP-69 and SP-5 Type 40 standards for 3 1/2 to 4 inch pipe with 2 inch insulation, so the load capacity defined by those standards is the governing limit.

Does the shield generate any noise, heat or draw power during all-day operation?

It is a passive metal component with no moving parts or electrical connections, so it produces no noise, no heat and consumes no power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.