We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel split-style beam clamp with locknut

Anvil

Anvil 0500315049 Threaded Rod Hanger 1,000 lb Galvanized Steel

SKU CH-4E5K-WCQCY

Split-style beam clamp mounts to I-beams and supports 3/8 in threaded rod up to 1,000 lb load

  • ColorTransparent
  • Supports 1,000 lb load capacity for heavy-duty piping
  • Galvanized steel finish resists corrosion in damp environments
  • Fits 3/8 in threaded rod with included locknut
  • Mounts on I-beam flanges up to 8 in wide
  • Meets ANSI/MSS SP-69 and UL Listed standards

Threaded Rod Hanger for 3/8 in Rods

This galvanised steel beam clamp accepts 3/8 in threaded rod and includes a locknut for secure fastening. It mounts on the bottom centre of I-beams up to 8 in wide and is rated for a 1,000 lb load capacity. The split-style design simplifies installation on structural steel in commercial and industrial piping systems. Suitable for mechanical contractors and maintenance teams needing reliable overhead support.

Galvanised Finish and UL Listing

The steel body carries a galvanised coating that resists corrosion in damp or exposed environments. Compliance with ANSI/MSS SP-69, MSS SP-58, A-A-1192A and UL listing confirms the clamp meets recognised mechanical and safety standards. No moving parts or powered components means silent operation and no electrical draw during normal use.

8 in Clamp Length and 11/16 in Throat Depth

An 8 in clamp length and 0.56 in width provide a compact footprint while the 11/16 in throat depth accommodates standard beam flanges. The included locknut reduces the risk of loosening under vibration. Buyers who need a larger rod diameter or a top-mount configuration will require a different clamp style.

Highlights

  • Supports 1,000 lb load capacity for heavy-duty piping
  • Galvanized steel finish resists corrosion in damp environments
  • Fits 3/8 in threaded rod with included locknut
  • Mounts on I-beam flanges up to 8 in wide
  • Meets ANSI/MSS SP-69 and UL Listed standards

Specifications

ColorTransparent
BrandANVIL

Questions about this item

How do I install the Anvil 0500315049 on an I-beam and which step is often missed?

Clamp the split-style body to the bottom centre of the I-beam up to 8 in wide, tighten the 3/8 in threaded rod into the 11/16 in throat, then secure the included locknut — the locknut is the step most often forgotten.

What maintenance or replacement will this galvanized steel clamp need over time?

Inspect the galvanized finish periodically for corrosion; if the coating wears through on the 0.56 in wide jaws or the locknut threads strip, replace the entire clamp assembly.

What limit appears first when this 1,000 lb hanger is under sustained load?

The 1,000 lb load capacity is the governing limit; sustained loading at or near that rating will reach the clamp's rated capacity before any other factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.