Anvil
Anvil 0500301809 Adjustable Swivel Loop Hanger 4" trap
Adjustable swivel loop hanger supports 4-inch pipe with 900 lb capacity and meets ANSI/MSS SP-69 and SP-58 standards
- TypeDrain Components
- Adjustable swivel design simplifies pipe alignment
- Supports up to 900 lb for secure suspension
- Galvanized steel construction resists corrosion in damp areas
- Meets NFPA, ANSI/MSS SP-69 and MSS SP-58 standards
- Tapped per A-A-1192A and WW-H-171-E specifications
Adjustable Swivel Loop Hanger 4
The Anvil 0500301809 is a carbon steel pipe support designed for suspending non-insulated stationary copper tube. Its adjustable swivel loop accommodates 4-inch pipe sizes and connects to a 3/8-inch rod for flexible positioning in plumbing installations.
Galvanized steel construction for sustained load
Galvanized steel construction supports a maximum load of 900 Lb, maintaining structural integrity under continuous weight. The material resists corrosion during prolonged exposure to environmental conditions in stationary piping systems.
Standards-compliant mounting for daily reliability
Tapped per NFPA standards and compliant with A-A-1192A Type 10, WW-H-171-E Type 10, ANSI/MSS SP-69, and MSS SP-58 Type 10, the hanger ensures consistent fit with standard rods. The 5 1/2-inch length provides adequate drop for typical suspension requirements.
Highlights
- Adjustable swivel design simplifies pipe alignment
- Supports up to 900 lb for secure suspension
- Galvanized steel construction resists corrosion in damp areas
- Meets NFPA, ANSI/MSS SP-69 and MSS SP-58 standards
- Tapped per A-A-1192A and WW-H-171-E specifications
Specifications
| Type | Drain Components |
|---|---|
| Brand | Anvil |
| Model | 0500301809 |
Questions about this item
How much weight can the 900 Lb rated hanger support when a pipe runs continuously?
The galvanized steel loop is rated for a maximum load of 900 Lb, so it will hold that weight all day without deformation.
What rod size must I already have to mount this 3/8 In adjustable hanger?
You need a 3/8 In threaded rod; the hanger's swivel nut is tapped for that exact diameter.
Will this Type 10 hanger meet the same ANSI/MSS SP-69 and SP-58 standards as my existing pipe supports?
Yes, it complies with ANSI/MSS SP-69 and MSS SP-58 Type 10, matching the standards called out for your current hangers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
