We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon steel riser clamp for six-inch pipe, fourteen and three-quarter inches long

Anvil

Anvil 0500173620 Riser Clamp Trap 6 In 14 3/4 In L

SKU CH-NFWZ-7MKXP MPN 0500173620

Carbon steel riser clamp supports 6-inch stationary steel or cast iron pipe up to 600 lb load

  • TypeDrain Components
  • Carbon steel construction resists corrosion on pipe risers
  • 1,600 lb max load secures heavy stationary piping
  • 14 3/4 in length fits 6 in pipe size
  • Meets A-A-1192A Type 8 and MSS SP-69 standards
  • UL and ULC listed for code compliance

Riser Clamp For 6 Inch Pipe

The Anvil 0500173620 riser clamp supports stationary steel pipe risers, cast iron pipe or conduit in a 6 inch size. Carbon steel construction provides the strength required for vertical pipe support. The clamp meets A-A-1192A Type 8, WW-H-171-E Type 8, ANSI/MSS SP-69 and MSS SP-58 Type 8 standards with UL and ULC listings.

Carbon Steel Build With 14 3/4 Inch Length

Carbon steel material handles a maximum load of 1,600 lb for reliable riser support. The 14 3/4 inch overall length and 1/2 inch bolt size suit standard installation requirements. This clamp is not intended for use with hanger rods, so installers must plan direct mounting accordingly.

Standards Compliant For Commercial Installations

UL and ULC listings confirm the clamp meets recognised safety standards for plumbing and mechanical systems. Compliance with ANSI/MSS SP-69 and MSS SP-58 Type 8 ensures acceptance in projects that require documented conformity. The multi-standard certification reduces specification risk for engineers and contractors.

Highlights

  • Carbon steel construction resists corrosion on pipe risers
  • 1,600 lb max load secures heavy stationary piping
  • 14 3/4 in length fits 6 in pipe size
  • Meets A-A-1192A Type 8 and MSS SP-69 standards
  • UL and ULC listed for code compliance

Specifications

TypeDrain Components
BrandAnvil
Model0500173620

Questions about this item

What load does the ANSI/MSS SP-69 and SP-58 Type 8 rating allow on this riser clamp?

The clamp is rated for a maximum load of 1,600 lb under the ANSI/MSS SP-69 and MSS SP-58 Type 8 standards, matching the supplier's stated capacity for stationary steel pipe, cast iron or conduit.

What pipe diameter and bolt size are required to mount the 14 3/4 in long clamp?

The clamp fits a 6 in pipe size and uses a 1/2 in bolt for securing the two halves around the riser.

How is the carbon steel riser clamp installed without hanger rods?

Position the two halves around the 6 in pipe, insert the 1/2 in bolts through the aligned ears, and torque them evenly so the clamp carries the 1,600 lb load directly — omitting hanger rods is intentional per the design.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.