We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon steel riser clamp for 5 inch pipe, 13 3/4 inch length

Anvil

Anvil 0500173612 riser clamp trap 5 in 13 3/4 in

SKU CH-K9FC-YQNGR MPN 0500173612

Supports stationary steel pipe risers, cast iron or conduit up to 500 lb, meeting UL-listed standards

  • TypeDrain Components
  • MaterialHAWA
  • Supports stationary steel pipe risers with carbon steel construction
  • Rated for 500 lb maximum load on 5 in pipe size
  • 13 3/4 in length fits standard riser installations
  • Meets A-A-1192A Type 8 and ANSI/MSS SP-69 standards
  • UL and ULC listed for code-compliant installations

5-inch pipe riser clamp

This Anvil riser clamp fits 5-inch stationary steel pipe, cast iron pipe or conduit. It is built from carbon steel and measures 13 3/4 inches in length with a 1/2-inch bolt size. The clamp is UL and ULC listed for code-compliant installations.

Carbon steel construction and load rating

The carbon steel body supports a maximum load of 1,500 pounds during normal service. It meets standards A-A-1192A Type 8, WW-H-171-E Type 8, ANSI/MSS SP-69 and MSS SP-58 Type 8. The clamp is not intended for use with hanger rods.

5-inch pipe size determines fit

This clamp is sized specifically for 5-inch pipe outside diameter. It will not fit smaller or larger pipe sizes. Verify your pipe dimensions before ordering to ensure proper support and code compliance.

Highlights

  • Supports stationary steel pipe risers with carbon steel construction
  • Rated for 500 lb maximum load on 5 in pipe size
  • 13 3/4 in length fits standard riser installations
  • Meets A-A-1192A Type 8 and ANSI/MSS SP-69 standards
  • UL and ULC listed for code-compliant installations

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0500173612

Questions about this item

How is the Anvil 0500173612 riser clamp installed on a 5 in pipe, and what step is often missed?

Place the two halves around the pipe, insert the 1/2 in bolts through the aligned holes, and torque them evenly; the step often missed is confirming the clamp bears on the pipe wall, not on a hanger rod, because this model is not intended for rod suspension.

What maintenance or replacement will the Anvil 0500173612 riser clamp need over time?

Inspect the carbon steel body and 1/2 in bolts periodically for corrosion or loosening; retorque bolts if vibration occurs, and replace the clamp if the metal shows pitting, cracking, or permanent deformation beyond the 1,500 lb rating.

What limit appears first when the Anvil 0500173612 riser clamp is under sustained load?

The 1,500 lb maximum load rating is the primary limit; exceeding it risks bolt stretch or clamp distortion before the carbon steel reaches its yield point, so the rated capacity governs sustained-use design.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.