We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon steel riser clamp for four-inch pipe, twelve and seven-eighths inches long

Anvil

Anvil 0500173604 riser clamp trap 4 in 12 7/8 in 750 lb

SKU CH-T0YZ-3SPG8 MPN 0500173604

Supports 4-inch stationary steel pipe, cast iron or conduit up to 750 lb with a 12 7/8-inch carbon-steel clamp meeting ANSI/MSS SP-69 and UL/ULC listing

  • TypeDrain Components
  • Supports stationary risers up to 750 lb load capacity
  • Carbon steel construction meets ANSI/MSS SP-69 and SP-58 standards
  • UL and ULC listed for code-compliant installations
  • Complies with A-A-1192A and WW-H-171-E Type 8 specifications
  • 12 7/8 in length fits 4 in pipe with 1/2 in bolt size

Product Identity

The Anvil 0500173604 riser clamp is a carbon-steel pipe support rated for a maximum load of 750 lb. It fits a 4-inch pipe size and measures 12 7/8 inches in length with a 1/2-inch bolt size. The clamp is UL and ULC listed and meets standards A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58, all Type 8. It is designed for stationary steel pipe risers, cast iron pipe or conduit.

Installation Checks

Verify that the pipe material and diameter match the 4-inch specification and that the structure can accommodate the 12 7/8-inch clamp length. The 1/2-inch bolt hardware must be compatible with the mounting surface. This clamp is not intended for use with hanger rods, so confirm the support method suits stationary riser applications. No other sizes or load ratings are available for this model.

Service Behaviour

Carbon-steel construction provides rigid support without moving parts, so thermal cycling and vibration do not affect clamping force. The clamp adds negligible weight to the system and produces no operational noise. Power draw is not applicable because the device is a passive mechanical component. Inspect bolt torque periodically to maintain the rated 750 lb capacity.

Highlights

  • Supports stationary risers up to 750 lb load capacity
  • Carbon steel construction meets ANSI/MSS SP-69 and SP-58 standards
  • UL and ULC listed for code-compliant installations
  • Complies with A-A-1192A and WW-H-171-E Type 8 specifications
  • 12 7/8 in length fits 4 in pipe with 1/2 in bolt size

Specifications

TypeDrain Components
BrandAnvil
Model0500173604

Questions about this item

What comes in the box with the Anvil 0500173604 riser clamp and is any extra hardware needed?

The clamp ships as a single carbon-steel unit with the 1/2 in bolts already fitted; no additional hangers or rods are required for stationary steel pipe, cast iron or conduit support.

Which pipe size and load rating should I select for a 4 in riser carrying up to 750 lb?

This model is built for 4 in pipe and rated at 750 lb maximum load, matching the A-A-1192A Type 8 and MSS SP-58 Type 8 standards.

How does the 750 lb rating apply when the clamp is installed on a real 4 in steel riser?

The 750 lb figure is the allowable vertical load on the stationary riser when the clamp is bolted per the 1/2 in bolt specification and the 12 7/8 in length spans the pipe.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.