We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon steel riser clamp for two inch pipe, ten and a quarter inches long

Anvil

Anvil 0500173562 Riser Clamp Trap 2 In 10 1/4 In 300 Lb

SKU CH-678R-F8J8C MPN 0500173562

Supports stationary 2-inch steel or cast-iron pipe risers up to 300 lb with a 10 1/4-inch carbon-steel clamp meeting MSS SP-58 and UL standards

  • TypeDrain Components
  • Supports stationary steel pipe risers with 300 lb max load
  • Carbon steel construction meets ANSI/MSS SP-69 and MSS SP-58 Type 8 standards
  • 10 1/4 in length fits 2 in pipe size for secure installation
  • UL and ULC listed for code-compliant plumbing applications
  • 7/16 in bolt size ensures reliable fastening without hanger rods

Riser clamp for 2 inch pipe

This carbon-steel riser clamp fits 2 inch stationary steel pipe, cast iron pipe or conduit. It spans 10 1/4 inches and uses a 7/16 inch bolt. The clamp is UL and ULC listed and meets A-A-1192A Type 8, WW-H-171-E Type 8, ANSI/MSS SP-69 and MSS SP-58 Type 8 standards.

Suits fixed vertical runs, not hanger rods

Installers supporting stationary risers in commercial or residential plumbing can use this clamp. It is not intended for use with hanger rods, so projects requiring suspended pipe support should look at a different hardware type.

Rated for 300 lb maximum load

The 300 lb load rating determines whether this clamp can handle the weight of the pipe assembly in a given installation. Verify the total load per support point against this figure before specifying the part.

Highlights

  • Supports stationary steel pipe risers with 300 lb max load
  • Carbon steel construction meets ANSI/MSS SP-69 and MSS SP-58 Type 8 standards
  • 10 1/4 in length fits 2 in pipe size for secure installation
  • UL and ULC listed for code-compliant plumbing applications
  • 7/16 in bolt size ensures reliable fastening without hanger rods

Specifications

TypeDrain Components
BrandAnvil
Model0500173562

Questions about this item

How do I install the Anvil 0500173562 riser clamp on a 2-inch pipe, and what is the common mistake?

Place the clamp around the pipe, insert the 7/16-inch bolts, and torque them evenly. The step often missed is confirming the pipe is fully seated before final tightening.

What maintenance or replacement will the Anvil 0500173562 riser clamp need over time?

Inspect the carbon steel body and bolts periodically for corrosion or loosening. Replace the clamp if the metal shows deformation, cracking, or if the 300-pound load rating can no longer be verified.

What is the first limit reached when the Anvil 0500173562 riser clamp is under sustained load?

The 300-pound maximum load rating is the primary limit. Exceeding this weight risks permanent deformation of the carbon steel or bolt failure under continuous stress.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.