We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil carbon steel pipe clamp, plain finish, 5 inch pipe size

Anvil

Anvil 0500093612 Pipe Clamp 5 In 9 7/8 In L

SKU CH-K9K7-PMV7F MPN 0500093612

Secures 5-inch pipe with a 9 7/8-inch carbon-steel clamp rated to 1,040 lb at 650 °F and 930 lb at 750 °F, meeting UL, ULC, FM and MSS SP-58 standards

  • TypeDrain Components
  • MaterialHAWA
  • Secure 5-inch pipe suspension with carbon-steel strength
  • Supports 1040 lb at 650 °F for hot-line reliability
  • Meets A-A-1192A and MSS SP-69 standards for code compliance
  • FM approved and UL/ULC listed for inspected installations
  • Plain finish resists corrosion in exposed plumbing runs

Medium Pipe Clamp Specification

This medium pipe clamp fits a 5 inch pipe size and measures 9 7/8 inches in length with a 5/8 inch thread size. It is constructed from carbon steel with a plain finish and is metal detectable. The clamp is designed for suspending cold pipe lines or hot lines where no insulation is required. It meets Federal Specification A-A-1192A, WW-H-171-E, ANSI/MSS SP-69 and MSS SP-58 standards.

Installers and Maintenance Teams

Plumbing professionals and industrial maintenance crews use this clamp to support horizontal pipe runs in commercial and institutional systems. The carbon steel build handles temperatures up to 750 degrees Fahrenheit with a 930 pound load rating. Buyers who need insulated pipe support or a different pipe diameter should look at other options.

Load Rating at Temperature

The maximum load capacity is 1040 pounds at 650 degrees Fahrenheit and 930 pounds at 750 degrees Fahrenheit. This thermal derating determines whether the clamp can safely carry the intended pipe weight at operating temperature. Verify the system design temperature and total supported load against these ratings before specifying this part.

Highlights

  • Secure 5-inch pipe suspension with carbon-steel strength
  • Supports 1040 lb at 650 °F for hot-line reliability
  • Meets A-A-1192A and MSS SP-69 standards for code compliance
  • FM approved and UL/ULC listed for inspected installations
  • Plain finish resists corrosion in exposed plumbing runs

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0500093612

Questions about this item

How do I install the 5/8 inch threaded rod and what step is often missed?

Thread the 5/8 inch rod through the clamp ears and tighten both nuts evenly; the step often missed is verifying the 9 7/8 inch centre-to-centre spacing matches the hanger points before final torque.

What maintenance or replacement will this carbon steel clamp need over time?

Inspect the plain finish periodically for corrosion; replace the clamp if the carbon steel shows pitting or if the 5/8 inch threads become damaged, as no protective coating is present.

What is the first load limit reached when the pipe runs continuously at high temperature?

At 750 degrees F the allowable load drops to 930 lb, which is lower than the 1040 lb rating at 650 degrees F, so the 750 degree threshold becomes the governing limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.