We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel socket-weld tee, three outlets, 2-inch pipe size

Anvil

Anvil 0362026205 Tee 2" Socket Weld Class 3000

SKU CH-BNT3-HV2BR

A forged-steel socket-weld tee rated to 3000 psi for 2-inch pipe, meeting ASME B 16.11

  • TypeOther
  • Forged steel construction handles 3000 psi service pressure
  • Socket weld connection creates a permanent leak-tight joint
  • Three-outlet tee splits flow in 2-inch piping systems
  • ASME B16.11 compliance confirms dimensional and material quality
  • Black finish protects forged steel from surface corrosion

Product Purpose

The Anvil 0362026205 Tee is a forged steel pipe fitting designed to join three sections of 2-inch pipe in high-pressure systems. It uses socket-weld connections and meets ASME B16.11 standards for Class 3000 service.

Who It Suits

This tee suits installers building 3000 psi piping networks that require a 2-inch socket-weld branch. It is not for buyers who need threaded or butt-weld ends, a different pressure class, or a pipe size other than 2 inches.

Capacity and Limits

The forged steel body handles a maximum pressure of 3000 psi with a 3-inch outside diameter and three connection holes. It runs out when system pressure exceeds the Class 3000 rating or when the piping specification calls for a larger or smaller nominal bore.

Highlights

  • Forged steel construction handles 3000 psi service pressure
  • Socket weld connection creates a permanent leak-tight joint
  • Three-outlet tee splits flow in 2-inch piping systems
  • ASME B16.11 compliance confirms dimensional and material quality
  • Black finish protects forged steel from surface corrosion

Specifications

BrandANVIL
TypeOther

Questions about this item

What pipe size and schedule must I already have to socket-weld this 2" Class 3000 tee?

You need 2-inch pipe with a schedule heavy enough for Class 3000 socket-weld service so the bore matches the tee's socket depth and pressure rating.

Can I join this forged-steel tee to older threaded or butt-weld fittings in the same run?

No — the socket-weld ends only accept plain-end pipe for fillet welding; threaded or butt-weld adapters would be required to connect dissimilar end types.

How do I verify the tee is holding its 3000 psi rating after installation?

Perform a hydrostatic test at the appropriate ASME B16.11 test pressure and inspect each fillet weld for leaks or cracks before placing the line in service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.