We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, half inch by six inches, threaded both ends, Schedule 40

Anvil

Anvil 0334528007 1/2 in 6 in Schedule 40 Steel Pipe Nipple Trap

SKU CH-VE3A-64RS1 MPN 0334528007

A 1/2 in Schedule 40 steel pipe nipple with 6 in overall length and male NPT threads for air, gas, oil, steam and non-potable water at 150 psi

  • TypeDrain Components
  • Galvanised steel resists corrosion for long service life
  • Schedule 40 wall handles 150 psi at 150 °F
  • Male NPT threads connect directly to standard fittings
  • 6-inch overall length suits compact piping runs
  • Welded Grade B steel construction made in the USA

1/2 in Schedule 40 Steel Pipe Nipple

This Anvil 0334528007 nipple is a 6 in welded steel component with male NPT threads on one end and threaded both ends. It is built to Schedule 40 dimensions for use with air, gas, non-potable water, oil or steam in plumbing and industrial piping systems. The black anodized finish protects the Grade B steel substrate.

Check Thread Compatibility and Pressure Rating

Verify that your existing piping uses 1/2 in nominal size with matching NPT threads before ordering. The nipple is rated for 150 psi at 150 degrees F and is compatible with Schedule 80 fittings. Confirm the media and operating temperature fall within these limits.

Galvanized Steel Handles Heat and Pressure

The welded steel construction and black anodized coating withstand the stated pressure and temperature without deformation. Steel pipe nipples of this type operate silently because they contain no moving parts. Power draw is not applicable to this passive fitting.

Highlights

  • Galvanised steel resists corrosion for long service life
  • Schedule 40 wall handles 150 psi at 150 °F
  • Male NPT threads connect directly to standard fittings
  • 6-inch overall length suits compact piping runs
  • Welded Grade B steel construction made in the USA

Specifications

TypeDrain Components
BrandAnvil
Model0334528007

Questions about this item

Does the nipple ship with any gaskets, sealant or additional fittings, or must I buy them separately?

The nipple is supplied as a single 6 in Schedule 40 steel piece with 1/2 in male NPT threads on both ends; gaskets, thread sealant and mating fittings are not included and must be purchased separately.

Should I choose the Schedule 40 version or the Schedule 80 compatible fitting for my 150 psi steam line?

The nipple itself is Schedule 40 rated for 150 psi at 150 °F, while the listed fitting compatibility is Schedule 80; select the Schedule 40 nipple for standard pressure service and match it with Schedule 80 fittings only if your system requires the heavier wall.

What does the 150 psi @ 150 °F rating mean when the nipple is installed in a real piping system?

It indicates the maximum continuous operating pressure the 1/2 in Grade B welded steel nipple can safely handle at temperatures up to 150 °F; above that temperature the allowable pressure drops according to standard piping codes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.