We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hexagonal malleable iron pipe bushing with threaded ends

Anvil

Anvil 0318907961 2-1/2" x 2" Malleable Iron Hex Bushing trap

SKU CH-W3HT-Z88RK MPN 0318907961

Malleable iron hex bushing connects 2-1/2" male NPT to 2" female NPT pipe at Class 150 for Schedule 40 systems, rated 300 psi at 150 °F

  • TypeDrain Components
  • MaterialHAWA
  • Class 150 rated for 300 psi at 150 °F
  • Malleable iron construction resists corrosion and impact
  • Male 2-1/2" NPT to female 2" NPT transition
  • Schedule 40 compatible for standard piping systems
  • New Anvil fitting ready for immediate installation

Anvil 2-1/2" Malleable Iron Hex Bushing

This Anvil hex bushing connects a 2-1/2 inch male NPT pipe to a 2 inch female NPT pipe. It is made from malleable iron rated for Class 150 service. The fitting suits Schedule 40 piping in plumbing and industrial systems. It handles a maximum operating pressure of 300 psi at 150 degrees Fahrenheit.

Installation uses standard NPT threads

Apply thread sealant or tape to the male threads before engaging the female side. Tighten with a wrench on the hex flats until the joint is secure. Over-tightening can crack the iron casting or strip the tapered threads. Ensure the pipe schedule matches the Class 150 rating to avoid pressure failures.

Verify your pipe schedule and pressure needs

Confirm the existing piping is Schedule 40 and uses NPT threads. Check that the system pressure and temperature stay within the 300 psi at 150 degrees F limit. This bushing reduces from 2-1/2 inch to 2 inch; it will not fit other size combinations. Buyers needing a different reduction or a higher pressure class should look elsewhere.

Highlights

  • Class 150 rated for 300 psi at 150 °F
  • Malleable iron construction resists corrosion and impact
  • Male 2-1/2" NPT to female 2" NPT transition
  • Schedule 40 compatible for standard piping systems
  • New Anvil fitting ready for immediate installation

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0318907961

Questions about this item

How can I confirm the 2-1/2" male NPT and 2" female NPT threads are sealing correctly after installation?

Pressurise the line up to the 300 psi rating at 150 °F and check each joint for leaks; a properly seated hex bushing shows no weeping at the threads.

What comes with the Anvil 0318907961 hex bushing and what must I supply?

The box contains the malleable iron Class 150 hex bushing only; you must provide Schedule 40 pipe, thread sealant or tape, and a wrench that fits the hex flats.

Which version of this fitting should I choose for a Schedule 40 system rated to 300 psi at 150 °F?

Select the 2-1/2" male NPT by 2" female NPT model 0318907961; it is the only Class 150 malleable iron hex bushing in the range built for that pressure and temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.