Anvil
Anvil 0318905361 1/4" x 1/8" Hex Bushing Trap
Malleable iron hex bushing reduces 1/4-inch male NPT to 1/8-inch female NPT for Class 300 Schedule 80 piping at 2,000 psi
- TypeDrain Components
- MaterialHAWA
- 1/4" to 1/8" NPT transition for tight pipe connections
- Class 300 steel withstands 2,000 psi at 150 °F
- Schedule 80 rating suits heavy-duty piping systems
- Malleable iron hex body allows secure wrench tightening
1/4" x 1/8" Hex Bushing Trap
The Anvil 0318905361 is a malleable iron hex bushing designed for pipe fittings. It connects a 1/4 inch male NPT thread to a 1/8 inch female NPT thread. The component is rated for Class 300 service and Schedule 80 pipe.
Suited for high-pressure industrial plumbing
This bushing handles a maximum operating pressure of 2,000 psi at 150 degrees F. It is not intended for low-pressure residential drainage systems. Installers requiring different thread sizes or pressure ratings should select an alternative fitting.
Highlights
- 1/4" to 1/8" NPT transition for tight pipe connections
- Class 300 steel withstands 2,000 psi at 150 °F
- Schedule 80 rating suits heavy-duty piping systems
- Malleable iron hex body allows secure wrench tightening
Specifications
| Type | Drain Components |
|---|---|
| Material | HAWA |
| Brand | Anvil |
| Model | 0318905361 |
Questions about this item
What pipe schedule and thread size does this 1/4" male NPT hex bushing accept?
It is rated for Schedule 80 pipe and has a 1/8" female NPT thread.
How do you seal the NPT threads correctly without cracking the fitting?
Apply PTFE tape clockwise on the male threads, hand-tighten, then turn one to two full turns with a wrench on the hex flats.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
$151.99
0.00179834BTC
In stock
BoatBuckle
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent
$25.99
0.00030751BTC
In stock