We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron reducing tee with three NPT ports in silver finish

Anvil

Anvil 0311048201 Galvanized Reducing Tee 1-1/2" x 1/2" x 1-1/2" FNPT bathware

SKU CH-XGM9-J0HF0

Galvanized malleable iron reducing tee connects three pipes at 1-1/2, 1/2 and 1-1/2 inches with NPT threads, rated to 1500 psi WOG and 300 psi steam per ASTM A-197 and ASME 16.3

  • ColorSilver
  • TypePipes, Valves & Fittings
  • Galvanized malleable iron body resists corrosion in wet environments
  • Class 300 rating handles 1500 psi water, oil, gas at 150 Degrees F
  • ASTM A-197 and ASME 16.3 compliance ensures code-accepted quality
  • Three NPT connections join 1-1/2 In. and 1/2 In. pipe runs
  • Operates from -20 Degrees to 150 Degrees F for hot and cold supply

Galvanized Reducing Tee for Plumbing

This Anvil reducing tee joins three NPT threads in a 1-1/2 inch by 1/2 inch by 1-1/2 inch configuration. The galvanized malleable iron body meets ASTM A-197 and ASME 16.3 standards for pressure piping. It is rated for 1500 psi at 150 degrees F WOG and 300 psi saturated steam. The fitting operates from -20 to 150 degrees F.

Suits Branch Connections in Iron Systems

Plumbers adding a smaller branch line to a 1-1/2 inch main will find the correct reduction here. The Class 300 rating covers high-pressure water, oil, gas and steam service within the stated temperature range. Installers needing copper, plastic or stainless steel transitions should select a fitting made for those materials.

Three-Port NPT Thread Pattern Decides Fit

The tee provides one 1/2 inch female port between two 1-1/2 inch female ports, all cut to NPT specifications. This exact thread combination determines whether the part matches the piping layout. Verify the required reduction and thread standard before ordering.

Highlights

  • Galvanized malleable iron body resists corrosion in wet environments
  • Class 300 rating handles 1500 psi water, oil, gas at 150 Degrees F
  • ASTM A-197 and ASME 16.3 compliance ensures code-accepted quality
  • Three NPT connections join 1-1/2 In. and 1/2 In. pipe runs
  • Operates from -20 Degrees to 150 Degrees F for hot and cold supply

Specifications

BrandANVIL
ColorSilver
TypePipes, Valves & Fittings

Questions about this item

Will the galvanized malleable iron body need replacement due to corrosion or wear over time?

The galvanized coating on the malleable iron body resists corrosion in standard plumbing conditions. Replacement is typically only needed if the fitting suffers physical damage or the coating is compromised during installation.

What pressure limit will be reached first when the tee operates continuously at high pressure?

The maximum working pressure is 1500 psi at 150°F WOG. For saturated steam service, the limit is 300 psi. The lower steam rating will govern first if the system carries steam.

How much heat does the fitting generate or retain when hot water runs through it all day?

The tee itself produces no heat. It conducts the fluid temperature, rated for continuous exposure up to 150°F. The galvanized iron body will match the water temperature without adding thermal load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.