We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducer coupling with female NPT threads

Anvil

Anvil 0310542600 Malleable Iron Reducer Coupling Class 300 trap

SKU CH-EF55-NVS6N MPN 0310542600

Malleable iron reducing coupling connects 1-inch and 1/2-inch NPT pipe at Class 300 pressure rating

  • TypeDrain Components
  • MaterialHAWA
  • Malleable iron construction resists corrosion
  • Class 300 rating handles 2000 psi at 150 °F
  • Reducing coupling joins 1 in and 1/2 in NPT threads
  • Designed for Schedule 80 pipe systems
  • New condition ensures full factory integrity

Class 300 Reducer Coupling

This malleable iron reducing coupling connects a one inch female NPT pipe to a half inch female NPT pipe. It is rated for Schedule 80 piping systems and carries a Class 300 pressure class. The fitting is designed for drain component installations where a secure, threaded transition is required.

Installers needing a high pressure threaded

Plumbers and maintenance technicians working with Schedule 80 systems will find this coupling matches the required pressure class and thread standard. It is not suited for installers who need a straight coupling, a different thread type, or a fitting rated for a lower pressure class.

2000 psi at 150 Degrees F maximum operating pressure

The coupling withstands two thousand psi at one hundred fifty degrees Fahrenheit, making it appropriate for high pressure drain lines operating within that limit. Systems exceeding this pressure or temperature rating require a differently rated fitting.

Highlights

  • Malleable iron construction resists corrosion
  • Class 300 rating handles 2000 psi at 150 °F
  • Reducing coupling joins 1 in and 1/2 in NPT threads
  • Designed for Schedule 80 pipe systems
  • New condition ensures full factory integrity

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310542600

Questions about this item

What pipe schedule must the existing piping be for this Class 300 reducer coupling to seal properly?

The coupling is rated for Pipe Schedule 80, so the connecting pipes should match that wall thickness for correct engagement.

Can this malleable iron coupling handle the pressure and temperature of an older steam line running near its 2,000 psi limit?

It is rated for 2,000 psi at 150 degrees F maximum operating pressure, so verify your system stays within both limits before installation.

How do I confirm the NPT threads on both the 1 in and 1/2 in ends are sealing without leaks after assembly?

Pressurise the line up to the 2,000 psi rating at no more than 150 degrees F and inspect both female NPT joints for any weeping or pressure drop.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.