We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing coupling with two female NPT threads

Anvil

Anvil 0310542006 Malleable Iron Reducer Coupling Class 300 trap

SKU CH-J6BK-RY0BG MPN 0310542006

A Class 300 malleable iron reducer coupling joins 3/4-inch and 3/8-inch NPT pipe at up to 2,000 psi and 150 °F

  • TypeDrain Components
  • MaterialHAWA
  • Malleable iron construction withstands 2,000 psi at 150 degrees F
  • Class 300 rating handles Schedule 80 pipe demands
  • Reduces 3/4 in NPT to 3/8 in NPT female threads
  • New condition ensures full factory integrity
  • Drain component designed for high-pressure plumbing systems

Reducing Coupling Details

This malleable iron reducing coupling connects a 3/4 inch female NPT pipe to a 3/8 inch female NPT pipe. It is rated for Schedule 80 piping systems and carries a Class 300 pressure rating. The fitting handles a maximum operating pressure of 2,000 psi at 150 degrees Fahrenheit. It is supplied new and ready for installation.

Suitable Installations

This coupling suits plumbers and maintenance teams joining dissimilar pipe sizes in high-pressure water, oil, or gas lines that require Class 300 strength. It is not for systems exceeding the stated pressure or temperature limits. Installers needing a straight coupling, a different material, or a lower pressure class should select another fitting.

Deciding Specification

The critical specification is the 3/4 inch to 3/8 inch female NPT reduction combined with the Class 300 rating for Schedule 80 pipe. Verify that your system operates at or below 2,000 psi at 150 degrees Fahrenheit and uses these exact thread sizes before purchasing.

Highlights

  • Malleable iron construction withstands 2,000 psi at 150 degrees F
  • Class 300 rating handles Schedule 80 pipe demands
  • Reduces 3/4 in NPT to 3/8 in NPT female threads
  • New condition ensures full factory integrity
  • Drain component designed for high-pressure plumbing systems

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310542006

Questions about this item

What pipe schedule must I already have for this Class 300 reducer coupling to thread on correctly?

It is made for Pipe Schedule 80, so your existing 3/4 in and 3/8 in pipes need to be that schedule for the NPT threads to seal.

Will the 3/8 in female NPT end mate with older iron pipe I want to keep in the system?

Yes, the 3/8 in female NPT thread follows the same standard used on older iron pipe, so it will connect directly without adapters.

How can I verify the joint is holding at the rated 2,000 psi after installation?

Pressurise the line up to 2,000 psi at no more than 150 °F and check for leaks; the coupling is rated for that maximum operating pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.