We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducer coupling with female NPT threads

Anvil

Anvil 0310541602 trap malleable iron reducer coupling class 300 schedule 80 1/2 1/4 NPT 2000 psi 150F

SKU CH-EWC6-8VXVW MPN 0310541602

Malleable iron reducer coupling rated 2,000 psi at 150 °F for Schedule 80 piping

  • TypeDrain Components
  • MaterialHAWA
  • Malleable iron construction resists corrosion and mechanical stress
  • Class 300 rating handles 2000 psi at 150 °F
  • Schedule 80 compatibility suits heavy-wall piping systems
  • 1/2 in to 1/4 in NPT reduction connects dissimilar pipe sizes
  • Female NPT threads on both ends simplify installation

Anvil 1/2" x 1/4" Reducer Coupling

This Anvil malleable iron reducer coupling connects a 1/2 inch female NPT pipe to a 1/4 inch female NPT pipe. It is rated for Schedule 80 piping systems and carries a Class 300 pressure class. The fitting is designed for drain component installations in plumbing applications.

Suits installers joining dissimilar pipe sizes

This coupling suits plumbers and maintenance technicians who need to transition between 1/2 inch and 1/4 inch NPT threads in a Schedule 80 system. It is not for installers working with press-fit, solder or push-to-connect pipe systems. It is also not for applications exceeding the stated pressure and temperature limits.

Class 300 pressure rating at 150 Degrees F

The single specification that decides fit is the maximum operating pressure of 2,000 psi at 150 Degrees F. This Class 300 rating determines whether the coupling can handle the system's working pressure and temperature. Verify your system pressure does not exceed this value before installation.

Highlights

  • Malleable iron construction resists corrosion and mechanical stress
  • Class 300 rating handles 2000 psi at 150 °F
  • Schedule 80 compatibility suits heavy-wall piping systems
  • 1/2 in to 1/4 in NPT reduction connects dissimilar pipe sizes
  • Female NPT threads on both ends simplify installation

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310541602

Questions about this item

Will the 1/2 inch and 1/4 inch female NPT threads fit my Schedule 80 pipe?

Yes, this Class 300 malleable iron reducer coupling is made for Schedule 80 pipe with 1/2 inch and 1/4 inch female NPT threads.

What is the common installation mistake with the NPT threads?

Over-tightening the tapered NPT threads can crack the malleable iron; tighten by hand then one to two turns with a wrench.

When should this coupling be replaced?

Replace if you see cracks, heavy corrosion, or leaks at the 1/2 inch or 1/4 inch NPT joints during routine checks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.