We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee with three female NPT ports

Anvil

Anvil 0310525605 Malleable Iron Reducing Tee Class 300 trap

SKU CH-TXSA-WZX1H MPN 0310525605

A malleable iron reducing tee rated Class 300 for Schedule 80 pipe with 2-inch and 1-inch NPT female connections, handling 500 psi at 150 degrees F

  • TypeDrain Components
  • MaterialHAWA
  • Malleable iron body withstands 500 psi operating pressure
  • Class 300 rating supports Schedule 80 pipe systems
  • Three female NPT ports enable versatile drain routing
  • Rated for 150°F maximum service temperature
  • Reducing tee connects 2 in and 1 in pipe sizes

Malleable iron reducing tee

The Anvil 0310525605 is a Class 300 malleable iron reducing tee built for Schedule 80 piping. It connects two 2 inch female NPT ports and one 1 inch female NPT port in a single fitting. Rated for 500 psi at 150 degrees F maximum operating pressure.

Installers needing a 2-to-1 inch transition

Suits plumbers and maintenance teams joining 2 inch and 1 inch Schedule 80 lines where a high-pressure threaded joint is required. Not for systems using smaller or larger pipe sizes, different thread types, or lower pressure class fittings.

Class 300 pressure rating

The fitting carries a 500 psi rating at 150 degrees F, which determines whether it meets the design pressure of the installation. Verify the system pressure and temperature against this limit before specifying the part.

Highlights

  • Malleable iron body withstands 500 psi operating pressure
  • Class 300 rating supports Schedule 80 pipe systems
  • Three female NPT ports enable versatile drain routing
  • Rated for 150°F maximum service temperature
  • Reducing tee connects 2 in and 1 in pipe sizes

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310525605

Questions about this item

What does the Anvil 0310525605 reducing tee include and is any additional piping material required?

The fitting is a single malleable iron reducing tee with three female NPT ports; pipe nipples, sealant and any mating fittings must be purchased separately.

Which class and schedule rating should I select for a 500 psi steam line at 150 °F?

Choose the Class 300 version rated for Schedule 80 pipe; it carries a maximum operating pressure of 500 psi at 150 °F.

How does the 500 psi at 150 °F rating translate when the tee is installed in a live steam system?

It means the tee can safely handle up to 500 psi working pressure while the fluid temperature does not exceed 150 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.