We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee, three female NPT ports

Anvil

Anvil 0310521406 malleable iron reducing tee

SKU CH-PDDW-9YNRA MPN 0310521406

A malleable iron reducing tee with three female NPT ports, rated Class 300 for Schedule 80 pipe at 2,000 psi and 150 °F

  • TypeDrain Components
  • MaterialHAWA
  • Malleable iron construction resists corrosion and mechanical stress
  • Class 300 rating handles 2,000 psi at 150°F for demanding systems
  • Reducing tee connects 1", 1", and 1/2" NPT female threads
  • Schedule 80 compatibility suits high-pressure piping installations
  • New condition ensures full material integrity from the factory

Anvil Malleable Iron Reducing Tee

This Anvil reducing tee connects three female NPT pipes in a 1" x 1" x 1/2" configuration. It is made from malleable iron for plumbing installations that require a branch connection with a smaller outlet. The fitting suits residential and commercial drainage systems needing durable metal components.

Class 300 Schedule 80 Pressure Limits

The tee is rated Class 300 for use with Schedule 80 pipe. It handles a maximum operating pressure of 2,000 psi at 150 degrees Fahrenheit. Systems exceeding this pressure or temperature range require a higher-rated fitting. The NPT threads conform to standard taper specifications for sealing with appropriate thread compound.

Malleable Iron Build and Threaded Connections

Malleable iron construction provides mechanical strength and resistance to cracking under stress compared to cast alternatives. The three female NPT ports accept standard male pipe threads directly without adapters. The 1/2-inch branch reduces flow capacity at that outlet relative to the 1-inch runs. Threaded joints allow disassembly for maintenance or system reconfiguration.

Highlights

  • Malleable iron construction resists corrosion and mechanical stress
  • Class 300 rating handles 2,000 psi at 150°F for demanding systems
  • Reducing tee connects 1", 1", and 1/2" NPT female threads
  • Schedule 80 compatibility suits high-pressure piping installations
  • New condition ensures full material integrity from the factory

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310521406

Questions about this item

Should I choose the 1 in x 1 in x 1/2 in reducing tee or a different size?

This model is a 1 in x 1 in x 1/2 in malleable iron reducing tee with three female NPT ports, so select it when you need to branch a half-inch line off a one-inch main.

What does the Class 300 rating mean once the tee is installed?

Class 300 indicates a maximum operating pressure of 2,000 psi at 150 degrees F, suitable for Schedule 80 piping systems.

The tee uses female NPT threads — what does that cap in practice?

Female NPT threads accept male NPT pipe ends and seal with thread compound or tape, limiting connections to compatible tapered pipe threads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.