We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil malleable iron tee trap, 1/2 inch FNPT, Class 300

Anvil

Anvil 0310516000 Tee Trap 1/2" FNPT Malleable Iron Class 300

SKU CH-62MA-RKQ4Z MPN 0310516000

A 1/2" FNPT malleable iron tee trap rated Class 300 for 2000 psi WOG at 150°F and 300 psi saturated steam, UL listed, FM approved, AAR approved, meeting ASME B16.3

  • TypeDrain Components
  • Rated for 2000 psi water, oil, gas at 150 °F
  • Withstands 300 psi saturated steam for high-temp lines
  • UL Listed, FM Approved, AAR Approved for code compliance
  • Meets ASME B 16.3 dimensional and material standards
  • Malleable iron Class 300 construction resists cracking under stress

Anvil Class 300 Tee Trap

The Anvil 0310516000 is a malleable iron tee trap with 1/2 inch FNPT connections. It is rated Class 300 for use in plumbing and industrial piping systems. The fitting meets ASME B16.3 standards and carries UL Listed, FM Approved and AAR Approved certifications. It is intended for installers who need a durable threaded branch connection.

Suited for high-pressure threaded piping

This tee suits systems operating up to 2000 psi at 150 degrees F WOG or 300 psi saturated steam. It is not for installations that require socket-weld or flanged ends. Builders who need larger diameters or different pressure classes should look at other fittings. The NPT threads require proper sealant for leak-free assembly.

Sustained pressure performance

The malleable iron body maintains its rated 2000 psi WOG and 300 psi steam limits under continuous service at 150 degrees F. Threaded joints stay tight through thermal cycling when installed to ASME B16.3 specifications. The material resists deformation during prolonged exposure to saturated steam at the rated pressure.

Highlights

  • Rated for 2000 psi water, oil, gas at 150 °F
  • Withstands 300 psi saturated steam for high-temp lines
  • UL Listed, FM Approved, AAR Approved for code compliance
  • Meets ASME B 16.3 dimensional and material standards
  • Malleable iron Class 300 construction resists cracking under stress

Specifications

TypeDrain Components
BrandAnvil
Model0310516000

Questions about this item

What piping must I already have to thread this 1/2" FNPT tee?

You need 1/2" male NPT pipe or fittings so the female threads on this tee can screw on directly.

Will the Class 300 malleable iron hold up next to older standard-pressure fittings?

Rated 2000 psi WOG at 150°F and 300 psi saturated steam, it exceeds typical Class 150 components and meets ASME B16.3.

How can I verify the tee is sealed and flowing after installation?

Pressurise the system to working pressure; no leaks at the joints and free flow through all three ports confirm correct assembly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.