We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron tee fitting with three female NPT ports

Anvil

Anvil 0310515804 Malleable Iron Tee Class 300 trap

SKU CH-R83R-1Z8B6 MPN 0310515804

A malleable-iron tee rated Class 300 for Schedule 80 pipe with three 3/8-inch female NPT ports and a 2,000 psi maximum operating pressure at 150 °F

  • TypeDrain Components
  • MaterialHAWA
  • Malleable iron construction handles 2,000 psi at 150°F
  • Class 300 rating suits Schedule 80 piping systems
  • Three 3/8-inch female NPT ports simplify branch connections
  • Anvil 0310515804 model ensures consistent manufacturing quality
  • New condition guarantees full pressure rating from installation

Anvil Malleable Iron Tee Class 300

This Anvil tee is a drain component made from malleable iron and rated for Class 300 service. It suits plumbing systems that require a 3/8 inch female NPT connection on all three outlets. The fitting is designed for use with Pipe Schedule 80 and is supplied new. It provides a reliable junction for redirecting flow in pressurised piping installations.

For Schedule 80 high-pressure piping

Installers working with Schedule 80 pipe at elevated pressures will find this tee matches the required class rating. It is not intended for systems using lighter wall schedules or lower pressure classes where a Class 300 fitting would be overspecified. Buyers needing a different thread size, outlet configuration, or material such as brass or steel should select an alternative fitting.

2 000 psi at 150 °F maximum operating pressure

The decisive specification is the maximum operating pressure of 2 000 psi at 150 degrees Fahrenheit. This pressure-temperature limit determines whether the tee can safely handle the design conditions of the intended piping system. Verify that the service pressure and temperature stay within this rating before installation.

Highlights

  • Malleable iron construction handles 2,000 psi at 150°F
  • Class 300 rating suits Schedule 80 piping systems
  • Three 3/8-inch female NPT ports simplify branch connections
  • Anvil 0310515804 model ensures consistent manufacturing quality
  • New condition guarantees full pressure rating from installation

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310515804

Questions about this item

Does the Anvil 0310515804 tee come with pipe nipples or sealant, or must they be purchased separately?

The tee is supplied as a single fitting with three 3/8 in female NPT ports; pipe nipples, thread sealant and any mounting hardware are not included and must be bought separately.

When should I choose the Class 300 malleable iron version instead of a lower-class fitting?

Choose the Class 300 version when the system operates up to 2,000 psi at 150 degrees F and uses Schedule 80 pipe; lower classes are rated for less pressure.

What does the 2,000 psi at 150 degrees F rating mean once the tee is installed in a steam or hydraulic line?

It means the fitting can continuously handle 2,000 psi while the fluid temperature stays at or below 150 degrees F; higher temperatures reduce the allowable pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.