We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron tee fitting with three female NPT ports

Anvil

Anvil 0310515606 Malleable Iron Tee Class 300 trap

SKU CH-4Y2T-9WK15 MPN 0310515606

Malleable iron tee rated Class 300 for Schedule 80 pipe with three 1/4-inch female NPT connections and 2,000 psi at 150°F maximum operating pressure

  • TypeDrain Components
  • MaterialHAWA
  • Malleable iron construction handles 2,000 psi at 150 °F
  • Class 300 rating matches Schedule 80 piping systems
  • Three 1/4 in female NPT ports simplify branch connections
  • New condition ensures full material integrity on arrival
  • Anvil 0310515606 model fits standard drain component assemblies

Anvil Malleable Iron Tee Class 300

The Anvil 0310515606 is a malleable iron tee fitting rated for Class 300 service. It provides three female NPT connections for joining pipework in plumbing and industrial systems. The component is supplied new and ready for installation.

Capacity and pressure headroom

Rated at 2,000 psi maximum operating pressure at 150 degrees F, the tee handles high-pressure steam, water, oil and gas lines with a wide safety margin. It is designed for use with Schedule 80 pipe where wall thickness matches the Class 300 rating. The fitting reaches its pressure limit at the stated temperature ceiling.

Female NPT thread compatibility

All three ports are 1/4 inch female NPT threads, so the tee only accepts male NPT fittings or nipples of the same size. Installers using BSPT, metric or larger NPT threads cannot connect directly without adapters. The thread standard is the single specification that decides fit.

Highlights

  • Malleable iron construction handles 2,000 psi at 150 °F
  • Class 300 rating matches Schedule 80 piping systems
  • Three 1/4 in female NPT ports simplify branch connections
  • New condition ensures full material integrity on arrival
  • Anvil 0310515606 model fits standard drain component assemblies

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310515606

Questions about this item

Will this Class 300 malleable iron tee thread onto my existing Schedule 80 pipe with 1/4 in NPT fittings?

Yes, each of the three ports is 1/4 in female NPT and the tee is rated for Schedule 80 pipe.

How can I confirm the tee is holding pressure after installation?

Pressurise the system to its working limit of 2,000 psi at 150 °F and check all three joints for leaks.

Does the box include any gaskets, sealant or pipe nipples, or just the tee itself?

Only the malleable iron tee is supplied; thread sealant, gaskets and nipples must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.