We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron 90 degree street elbow, Class 300, 3/8 inch NPT male and female threads

Anvil

Anvil 0310507603 Malleable Iron 90 Degree Street Elbow Class 300 trap

SKU CH-CPH6-AQW5H MPN 0310507603

Malleable iron 90-degree street elbow rated Class 300 for Schedule 80 pipe with 2,000 psi maximum operating pressure at 150°F

  • TypeDrain Components
  • MaterialHAWA
  • 90-degree street elbow routes pipe runs in tight spaces
  • Malleable iron body resists cracking under mechanical stress
  • Class 300 rating handles 2 000 psi at 150 °F
  • Female and male NPT threads connect without extra adapters
  • Suits Schedule 80 pipe for high-pressure systems

Product Identity

The Anvil 0310507603 is a malleable iron 90 degree street elbow rated Class 300 for drain and trap installations. It suits plumbers and maintenance crews who need a compact directional change in threaded pipework.

Build & Connections

Malleable iron construction provides mechanical strength for Schedule 80 piping systems. One end carries a 3/8 inch female NPT thread and the other a 3/8 inch male NPT thread, allowing direct inline assembly without extra couplings.

Pressure & Temperature Limits

The fitting is rated for 2,000 psi at a maximum operating temperature of 150 degrees F. It is not intended for services that exceed this pressure-temperature envelope or for applications requiring a different thread standard.

Highlights

  • 90-degree street elbow routes pipe runs in tight spaces
  • Malleable iron body resists cracking under mechanical stress
  • Class 300 rating handles 2 000 psi at 150 °F
  • Female and male NPT threads connect without extra adapters
  • Suits Schedule 80 pipe for high-pressure systems

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310507603

Questions about this item

What pressure does the Class 300 NPT thread rating cap at 150 Degrees F?

The Class 300 rating caps the maximum operating pressure at 2,000 psi when the fluid temperature is 150 Degrees F.

What pipe schedule and thread size must the mating fitting match for this 3/8 in street elbow?

It requires a Schedule 80 pipe with 3/8 in NPT threads on both the female and male ends to seal correctly.

How do you install the malleable iron elbow without cracking the female port?

Apply thread sealant to the male NPT threads only, then hand-tighten before using a wrench on the hex flats; over-torquing the female port is the common mistake.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.