We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black malleable iron 90 degree elbow Class 300

Anvil

Anvil 0310501200 90 Degree Elbow Class 300 trap

SKU CH-QXSG-VCC5N MPN 0310501200

A malleable iron 90-degree elbow rated Class 300 for Schedule 80 pipe, handling 1,500 psi at 150 °F with 1 1/4-inch female NPT ends

  • TypeDrain Components
  • MaterialHAWA
  • Malleable iron construction resists corrosion in demanding plumbing systems
  • Class 300 rating handles 500 psi at 150 °F for high-pressure service
  • Schedule 80 compatibility suits heavy-duty pipe installations
  • 90-degree female NPT ends simplify right-angle connections
  • Black finish provides durable surface protection

90 Degree Elbow Class 300

The Anvil 0310501200 is a malleable iron pipe fitting designed for joining two sections of 1 1/4 inch NPT female-threaded pipe at a right angle. It is intended for installers and maintenance teams working on pressurised piping systems that require a durable, black-finished elbow rated for heavy-duty service.

Schedule 80 capacity and 500 psi headroom

Rated Class 300 for Schedule 80 pipe, the elbow handles a maximum operating pressure of 500 psi at 150 degrees Fahrenheit, providing substantial headroom for steam, compressed air or hydraulic lines. It runs out of margin above that temperature-pressure combination or when used with thinner-wall pipe not meeting Schedule 80 requirements.

Female NPT connections for direct assembly

Both ends feature 1 1/4 inch female NPT threads, allowing direct engagement with male-threaded pipe nipples or fittings without extra adapters. The malleable iron construction resists cracking under mechanical stress, freeing the installer from needing specialised welding equipment or flanged connections for this joint.

Highlights

  • Malleable iron construction resists corrosion in demanding plumbing systems
  • Class 300 rating handles 500 psi at 150 °F for high-pressure service
  • Schedule 80 compatibility suits heavy-duty pipe installations
  • 90-degree female NPT ends simplify right-angle connections
  • Black finish provides durable surface protection

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310501200

Questions about this item

Will this Class 300 malleable iron elbow handle the pressure from my existing Schedule 80 piping?

Yes, the elbow is rated for 1,500 psi at 150 degrees F and is designed for Schedule 80 pipe, matching the pressure class of your current system.

How can I confirm the 90-degree NPT threads sealed properly after installation?

Pressurise the line up to the 1,500 psi rating and inspect both 1 1/4 inch female NPT connections for leaks; a dry joint under test pressure confirms a correct seal.

Does the box include any gaskets or thread sealant for the 1 1/4 inch female NPT ports?

The fitting is supplied as a single black malleable iron elbow; pipe thread sealant or tape must be purchased separately to seal the NPT connections.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.