We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron street tee, 2 inch FNPT x MNPT x FNPT, Class 150, 300 psi

Anvil

Anvil 0310063003 Malleable Iron Street Tee 2 in Class 150 300 psi

SKU CH-8RDJ-2XBWA MPN 0310063003

A malleable iron street tee with FNPT, MNPT and FNPT connections for 2 in piping, rated to 300 psi at 150 °F and compliant with ASME B 16.3

  • TypeDrain Components
  • Malleable iron construction resists corrosion and mechanical stress
  • Class 150 rating supports 300 psi at 150 °F for demanding pressure systems
  • FNPT x MNPT x FNPT connections enable direct transitions between male and female threads
  • UL and FM listed with ASME B16.3 compliance for code-approved installations
  • Operating range from -20 °F to 350 °F handles steam, water and gas services

Plumbing street tee for 2 in pipe systems

The Anvil 0310063003 is a malleable iron street tee built for 2 in pipe installations. It carries a Class 150 rating and a maximum working pressure of 300 psi at 150 °F. The fitting uses FNPT x MNPT x FNPT connections for threaded assembly. It is designed for drain and trap applications in commercial or residential plumbing.

FM and UL listed with ASME B16.3 compliance

The component meets FM and UL listings and conforms to ASME B16.3 dimensional standards. This approval confirms the fitting is manufactured to recognised industry tolerances for malleable iron threaded fittings. The certifications support use in regulated piping systems where code compliance is required. No additional software or accessories are included with the fitting.

Rated for 300 psi at 150 °F saturated steam

The single specification that determines suitability is the 300 psi pressure rating at 150 °F with a saturated steam limit of 150 psi. Systems operating above these pressure or temperature limits cannot use this tee. Buyers needing higher pressure classes or larger pipe diameters should select a different fitting. The temperature range extends from -20 °F to 350 °F.

Highlights

  • Malleable iron construction resists corrosion and mechanical stress
  • Class 150 rating supports 300 psi at 150 °F for demanding pressure systems
  • FNPT x MNPT x FNPT connections enable direct transitions between male and female threads
  • UL and FM listed with ASME B16.3 compliance for code-approved installations
  • Operating range from -20 °F to 350 °F handles steam, water and gas services

Specifications

TypeDrain Components
BrandAnvil
Model0310063003

Questions about this item

Will the malleable iron body need any corrosion protection or scheduled replacement?

The malleable iron construction is rated for 300 psi at 150 °F and saturated steam at 150 psi, so under normal water or steam service it does not require routine replacement or added corrosion protection.

What pressure or temperature limit will be reached first during continuous high-temperature operation?

Saturated steam pressure is limited to 150 psi, which is lower than the 300 psi water rating, so the steam limit governs continuous high-temperature use.

How much heat does the fitting radiate when steam at 150 psi runs through it all day?

At the maximum saturated steam pressure of 150 psi the fitting sees about 350 °F surface temperature; it has no moving parts or insulation, so radiated heat equals the pipe temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.