We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black iron street tee with three NPT connections

Anvil

Anvil 0310062807 Street Tee 1-1/2 in NPT Black Iron trap

SKU CH-R9FZ-4EPB4 MPN 0310062807

A 1-1/2 in NPT black iron street tee rated for Schedule 40 pipe and 300 psi at 150 °F

  • TypeDrain Components
  • MaterialHAWA
  • Black iron construction resists corrosion
  • Class 150 rating handles 300 psi at 150 °F
  • Schedule 40 compatibility fits standard piping
  • NPT threads on three ports simplify installation

Anvil Street Tee 1-1/2 in NPT

The Anvil 0310062807 is a black iron street tee built for plumbing drainage systems. It connects a 1-1/2 inch male NPT end with two 1-1/2 inch female NPT ports. The fitting is rated for Schedule 40 pipe and a maximum operating pressure of 300 psi at 150 degrees Fahrenheit.

Class 150 Malleable Iron Drain Fitting

This tee replaces older or damaged drain components in residential or light commercial waste lines. The jump is worth it when a durable, pressure-rated junction is required for a 1-1/2 inch NPT installation. It is not suited for systems needing larger diameters, different thread types, or higher temperature ratings.

Highlights

  • Black iron construction resists corrosion
  • Class 150 rating handles 300 psi at 150 °F
  • Schedule 40 compatibility fits standard piping
  • NPT threads on three ports simplify installation

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310062807

Questions about this item

What pipe schedule and thread size does the 1-1/2 in NPT black iron street tee require?

The tee is made for Schedule 40 pipe with 1-1/2 in NPT threads on all three connections — two female and one male.

How do you seal the male NPT end of this street tee without cracking the Class 150 malleable iron?

Apply PTFE tape or pipe dope to the male threads only, then tighten one to two turns past hand-tight; over-torquing splits the Class 150 casting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.