We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black malleable iron street tee with threaded ends

Anvil

Anvil 0310061601 Malleable Iron Street Tee Class 150 trap

SKU CH-YMJA-J5HYS MPN 0310061601

A malleable iron street tee with 1/4 in NPT connections rated for 300 psi at 150°F

  • TypeDrain Components
  • Malleable iron construction withstands 300 psi operating pressure
  • Class 150 rating suits Schedule 40 piping systems
  • Street tee design connects 1/4 in female NPT, male NPT, and female NPT ports
  • Black finish provides corrosion resistance in plumbing installations
  • New condition ensures factory-original performance for drain applications

Anvil Malleable Iron Street Tee 1/4 NPT

This Anvil 0310061601 street tee is a malleable iron pipe fitting rated Class 150 for Schedule 40 piping. It connects a 1/4 inch female NPT branch to a 1/4 inch male NPT run and a 1/4 inch female NPT outlet. The black fitting handles 300 psi at 150 degrees F maximum operating pressure.

Suits plumbing repairs

Installers joining three 1/4 inch NPT threads in water, air or oil lines will find the correct thread pattern here. Systems requiring larger diameters, different thread standards or higher pressure classes must use other fittings not covered by this model.

Class 150 pressure rating at 300 psi

The single specification that decides fit is the Class 150 rating good for 300 psi at 150 degrees F. Verify your system design pressure and temperature stay within this limit before installing the tee.

Highlights

  • Malleable iron construction withstands 300 psi operating pressure
  • Class 150 rating suits Schedule 40 piping systems
  • Street tee design connects 1/4 in female NPT, male NPT, and female NPT ports
  • Black finish provides corrosion resistance in plumbing installations
  • New condition ensures factory-original performance for drain applications

Specifications

TypeDrain Components
BrandAnvil
Model0310061601

Questions about this item

Does the Anvil 0310061601 street tee come with pipe sealant or do I need to buy thread compound separately?

The fitting is supplied alone; pipe thread sealant or tape must be purchased separately for the NPT connections.

How do I decide between the Class 150 and other pressure classes for this 1/4 in malleable iron tee?

Choose Class 150 when your system operates at or below 300 psi at 150 °F; higher-pressure systems require a higher class fitting.

What does the 300 psi at 150 °F rating mean once the tee is installed in a Schedule 40 piping run?

It is the maximum continuous operating pressure the tee can handle at that temperature in a Schedule 40 system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.