We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee with three female threaded openings

Anvil

Anvil 0310049606 2" x 2" x 1/2" Malleable Iron Reducing Tee trap

SKU CH-V8N4-DAVQN MPN 0310049606

A 2" x 2" x 1/2" malleable iron reducing tee with FNPT connections, rated to 300 psi at 150°F and 150 psi saturated steam at 350°F, meeting ASME B 16.3 and UL/FM standards

  • TypeDrain Components
  • Malleable iron construction resists corrosion and mechanical stress
  • Reducing tee connects 2 in, 2 in and 1/2 in FNPT pipes in one fitting
  • Rated 300 psi at 150 °F for reliable high-pressure service
  • Saturated steam rating 150 psi at 350 °F suits heating systems
  • Meets ASME B 16.3 and UL/FM standards for code compliance

Reducing Tee for Drain Systems

This Anvil malleable iron reducing tee connects 2-inch and 1/2-inch FNPT pipe ends in drainage installations. It is rated for 300 psi at 150 degrees Fahrenheit and 150 psi saturated steam at 350 degrees Fahrenheit. The fitting meets ASME B16.3 and UL/FM standards. Builders needing different pipe diameters or a non-reducing layout cannot use this model.

Class 150 Pressure and Temperature Limits

The Class 150 rating sets a maximum pressure of 300 psi at 150 degrees Fahrenheit for water, oil or gas service. Saturated steam service is limited to 150 psi at 350 degrees Fahrenheit. Operating temperature range spans -20 to 350 degrees Fahrenheit. Systems that exceed these pressure or temperature boundaries require a higher-class fitting.

FNPT Threaded Installation

Tapered FNPT threads seal with pipe dope or tape when tightened to the proper engagement. Malleable iron resists cracking during assembly better than cast iron. Common issues include cross-threading, over-tightening that splits the fitting, or debris preventing a leak-free seal.

Highlights

  • Malleable iron construction resists corrosion and mechanical stress
  • Reducing tee connects 2 in, 2 in and 1/2 in FNPT pipes in one fitting
  • Rated 300 psi at 150 °F for reliable high-pressure service
  • Saturated steam rating 150 psi at 350 °F suits heating systems
  • Meets ASME B 16.3 and UL/FM standards for code compliance

Specifications

TypeDrain Components
BrandAnvil
Model0310049606

Questions about this item

Should I choose the 2" x 2" x 1/2" reducing tee or a different size for my piping?

This model is a 2" x 2" x 1/2" malleable iron reducing tee with FNPT connections; select it when your system needs that exact branch reduction.

What does the 300 psi rating mean once the tee is installed in a real system?

The tee is rated for 300 psi at 150 °F and 150 psi saturated steam at 350 °F, so it handles those pressures within the stated temperature range.

Which standard governs the thread interface and what does it cap in practice?

It meets ASME B16.3 for malleable iron threaded fittings, which defines the Class 150 thread dimensions and pressure-temperature limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.