We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee with three female NPT ports

Anvil

Anvil 0310049200 Trap Malleable Iron Reducing Tee Class 150

SKU CH-ZV4H-CF7QK MPN 0310049200

Malleable iron reducing tee connects three female NPT pipes at 2 in, 2 in and 1 in, rated for 300 psi at 150 °F

  • TypeDrain Components
  • MaterialHAWA
  • Malleable iron construction resists corrosion in plumbing systems
  • Class 150 rating handles 300 psi at 150 °F
  • Reducing tee connects 2 in, 2 in and 1 in NPT female ports
  • Schedule 40 compatibility suits standard pipe installations
  • Drain component designed for reliable fluid distribution

Malleable Iron Reducing Tee Class 150

This Anvil 0310049200 reducing tee connects three female NPT ports in a 2 in, 2 in, 1 in arrangement. The malleable iron body is rated for Class 150 service at 300 psi and 150 degrees F maximum operating pressure. It is designed for Schedule 40 piping systems.

Installers needing a 2 in to 1 in branch connection

Plumbers requiring a straight coupling, a different port combination or a higher pressure class will need another fitting. This tee does not suit applications outside the stated Class 150 rating or non-NPT thread standards.

Highlights

  • Malleable iron construction resists corrosion in plumbing systems
  • Class 150 rating handles 300 psi at 150 °F
  • Reducing tee connects 2 in, 2 in and 1 in NPT female ports
  • Schedule 40 compatibility suits standard pipe installations
  • Drain component designed for reliable fluid distribution

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310049200

Questions about this item

How do I install the 2 in NPT reducing tee without cross-threading the 1 in branch?

Wrap PTFE tape clockwise on male threads, hand-tighten each connection, then finish with a wrench — no more than one to two turns past hand-tight to avoid cracking the malleable iron.

What maintenance does the Class 150 malleable iron tee need over time?

Inspect joints annually for weeping; re-apply thread sealant if drips appear, and replace the tee if corrosion or cracked threads develop.

At what pressure does the 300 psi rating become the limiting factor during sustained hot-water use?

The 300 psi maximum operating pressure at 150 °F is the first limit reached; sustained pressure above that risks joint failure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.