We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee, three female NPT ports, class 150

Anvil

Anvil 0310048806 trap reducing tee malleable iron class 150 schedule 40 300 psi

SKU CH-68M6-5BMGS MPN 0310048806

Malleable iron reducing tee for Schedule 40 pipe, rated 300 psi at 150 °F

  • TypeDrain Components
  • MaterialHAWA
  • Reduces pipe size with 2 in, 2 in, 1-1/2 in NPT female ends
  • Malleable iron construction rated for Class 150 service
  • Handles 300 psi maximum operating pressure at 150 °F
  • Designed for Schedule 40 piping systems
  • Anvil model 0310048806 supplied new

Malleable Iron Reducing Tee

The Anvil 0310048806 is a Class 150 malleable iron reducing tee designed for Schedule 40 piping systems. It provides three female NPT connections to join pipes of different diameters in plumbing installations. The fitting handles a maximum operating pressure of 300 psi at 150 degrees Fahrenheit.

Upgrading From Lower-Rated Fittings

This tee replaces standard fittings when a system requires the strength of malleable iron and a 300 psi pressure rating at elevated temperatures. It is not for applications needing welded connections, different thread standards, or pressure ratings beyond Class 150 specifications.

Highlights

  • Reduces pipe size with 2 in, 2 in, 1-1/2 in NPT female ends
  • Malleable iron construction rated for Class 150 service
  • Handles 300 psi maximum operating pressure at 150 °F
  • Designed for Schedule 40 piping systems
  • Anvil model 0310048806 supplied new

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310048806

Questions about this item

What pipe sizes and thread type does the 2 in x 2 in x 1-1/2 in reducing tee require?

The tee accepts 2 in female NPT on two outlets and 1-1/2 in female NPT on the third outlet for Schedule 40 pipe.

How is the malleable iron tee installed, and what step is often missed?

Apply thread sealant to the NPT threads, hand-tighten, then wrench-tighten one to two turns; the missed step is skipping sealant on all three connections.

When should the Class 150 malleable iron tee be inspected or replaced?

Inspect for corrosion or leakage at each joint during routine system checks; replace if threads are damaged or pressure exceeds the 300 psi @ 150 °F rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.