We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee with three female NPT ports

Anvil

Anvil 0310037205 reducing tee malleable iron Class 150 300 psi

SKU CH-AGVX-D5QSC MPN 0310037205

A malleable iron reducing tee rated Class 150 for Schedule 40 pipe with three female NPT ports

  • TypeDrain Components
  • MaterialHAWA
  • Reduces pipe sizes with 1/2 in, 1/2 in, 1/4 in NPT female connections
  • Malleable iron construction handles 300 psi at 150 °F
  • Class 150 rating suits Schedule 40 piping systems
  • Three female NPT ports simplify drain and trap assemblies
  • Anvil 0310037205 model ensures exact specification match

Anvil Malleable Iron Reducing Tee

This Anvil 0310037205 reducing tee connects three female NPT threads in a Class 150 malleable iron body. It joins 1/2 in, 1/2 in and 1/4 in pipe ends for Schedule 40 plumbing systems. The fitting is supplied new for drain component installations.

Suits installers joining mixed NPT sizes

Plumbers needing a 1/2 in to 1/4 in branch on a 1/2 in run will use this tee. It is not for installers who require a straight coupling or a different thread combination. Buyers needing higher pressure ratings or alternative materials should look at other fittings.

Class 150 rated for 300 psi at 150 °F

The maximum operating pressure is 300 psi at 150 degrees Fahrenheit. This single rating decides whether the tee matches the system design pressure and temperature. Verify the service conditions against this limit before specifying the part.

Highlights

  • Reduces pipe sizes with 1/2 in, 1/2 in, 1/4 in NPT female connections
  • Malleable iron construction handles 300 psi at 150 °F
  • Class 150 rating suits Schedule 40 piping systems
  • Three female NPT ports simplify drain and trap assemblies
  • Anvil 0310037205 model ensures exact specification match

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310037205

Questions about this item

What is included with the Anvil 0310037205 reducing tee and what extra parts are needed?

The tee itself is supplied; you must provide Schedule 40 pipe and NPT thread sealant or tape for the three female connections.

Which version of the Anvil 0310037205 should I select for a 1/2 in and 1/4 in NPT system?

This single model has 1/2 in female NPT on two outlets and 1/4 in female NPT on the third; choose it when that exact reduction is required.

What does the 300 psi rating mean when the tee is installed in a hot water line?

It indicates the maximum operating pressure at 150 °F, so the joint must not exceed 300 psi at that temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.