We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron tee fitting with three female NPT ports

Anvil

Anvil 0310030200 Malleable Iron Tee Class 150 Trap

SKU CH-KJXN-E59MY MPN 0310030200

A malleable iron tee with three 1-inch female NPT outlets rated Class 150 for Schedule 40 pipe and 300 psi maximum working pressure

  • TypeDrain Components
  • MaterialHAWA
  • Malleable iron construction resists corrosion and mechanical stress
  • Class 150 rating suits standard Schedule 40 piping systems
  • Three 1-inch female NPT ports simplify branch connections
  • 300 psi at 150 °F maximum operating pressure handles demanding service
  • Anvil 0310030200 model ensures consistent dimensional accuracy

Malleable Iron Tee for Schedule 40 Pipe

The Anvil 0310030200 is a Class 150 malleable iron tee designed for Schedule 40 piping systems. It features three 1-inch female NPT connections arranged in a tee configuration. The fitting carries a maximum operating pressure of 300 psi at 150 degrees Fahrenheit.

Installers needing threaded branch connections

This tee suits plumbers and pipefitters joining three sections of 1-inch threaded pipe in water, oil, or gas lines rated for Class 150 service. It is not intended for systems exceeding the stated pressure or temperature limits, nor for applications requiring welded, flanged, or grooved joint methods.

Highlights

  • Malleable iron construction resists corrosion and mechanical stress
  • Class 150 rating suits standard Schedule 40 piping systems
  • Three 1-inch female NPT ports simplify branch connections
  • 300 psi at 150 °F maximum operating pressure handles demanding service
  • Anvil 0310030200 model ensures consistent dimensional accuracy

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0310030200

Questions about this item

What pipe schedule does the 1 in female NPT tee accept?

The tee is rated for Schedule 40 pipe with 1 in female NPT threads on all three ports.

How should the Class 150 malleable iron tee be threaded to avoid leaks?

Apply pipe-thread sealant or tape to the male threads only, then tighten each joint to the recommended torque for 1 in NPT connections.

When should the Anvil 0310030200 tee be inspected or replaced?

Inspect for corrosion or thread damage during routine system checks; replace if pressure testing exceeds 300 psi at 150 °F or if visible cracks appear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.