We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black malleable iron 90-degree elbow pipe fitting with threaded ends

Anvil

Anvil 0310000807 Malleable Iron 90 Degree Elbow Class 150 trap

SKU CH-8T5Z-EQJNY MPN 0310000807

Malleable iron 90-degree elbow with FNPT connections, rated Class 150 for 300 psi at 150 °F and 150 psi saturated steam at 350 °F

  • TypeDrain Components
  • 90-degree elbow routes pipe around tight corners
  • Malleable iron construction withstands 300 psi at 150 °F
  • Class 150 rating handles saturated steam at 150 psi and 350 °F
  • FNPT threads connect directly to 1/2 in pipe without adapters
  • Meets ASME B16.3 and UL/FM standards for code compliance

Anvil Malleable Iron 90° Elbow

The Anvil 0310000807 is a 90-degree elbow fitting made from malleable iron and rated to Class 150. It features a 1/2 inch FNPT connection and is designed for use in piping systems requiring a change of direction. The fitting meets ASME B 16.3 standards and carries UL and FM approvals for listed applications.

Suitable for standard pressure piping

This elbow suits installers joining 1/2 inch FNPT threads in water, oil, gas or saturated steam lines operating within the rated pressure and temperature limits. It is not intended for systems exceeding 300 psi at 150 degrees F or 150 psi saturated steam at 350 degrees F, nor for environments outside the -20 to 350 degrees F range.

Connects directly to 1/2 inch FNPT threads

The fitting threads onto matching male NPT pipe ends without adapters, simplifying assembly in tight routing situations. Its malleable iron construction provides mechanical strength for structural support within the piping layout, while the Class 150 rating defines the pressure envelope for the connected system.

Highlights

  • 90-degree elbow routes pipe around tight corners
  • Malleable iron construction withstands 300 psi at 150 °F
  • Class 150 rating handles saturated steam at 150 psi and 350 °F
  • FNPT threads connect directly to 1/2 in pipe without adapters
  • Meets ASME B16.3 and UL/FM standards for code compliance

Specifications

TypeDrain Components
BrandAnvil
Model0310000807

Questions about this item

What pipe size and thread type must my existing piping have to connect this 1/2 in FNPT elbow?

Your piping must be 1/2 inch nominal size with male NPT threads to match the female NPT connections on this Class 150 malleable iron elbow.

Will this Class 150 elbow handle the same pressure and temperature ratings as my existing ASME B16.3 fittings?

Yes, it meets ASME B16.3 with a 300 psi rating at 150 °F and 150 psi saturated steam rating at 350 °F, matching standard Class 150 specifications.

How can I verify the elbow is installed correctly and rated for my system after assembly?

Confirm the 90-degree alignment, check for leak-free FNPT joints, and ensure your system pressure stays below 300 psi at 150 °F or 150 psi steam at 350 °F per the ASME B16.3 rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.