We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron eccentric reducer coupling, dark rough finish

Anvil

Anvil 0300154002 trap eccentric reducer cast iron class 125 schedule 40 175 psi 150 degrees F

SKU CH-FDE7-0EJN5 MPN 0300154002

Cast iron eccentric reducer coupling rated 175 psi at 150 degrees F for Schedule 40 pipe

  • TypeDrain Components
  • MaterialHAWA
  • Cast iron construction handles 175 psi at 150 °F
  • Class 125 rating suits Schedule 40 piping systems
  • Eccentric design keeps pipe centres aligned for smooth flow
  • Female NPT threads on both ends enable direct connection
  • Anvil model 0300154002 built for drain and trap installations

Eccentric reducer coupling for drain systems

The Anvil 0300154002 is a cast iron eccentric reducer coupling rated Class 125 for Schedule 40 pipe. It connects a 1-1/2 inch female NPT port to a 3/4 inch female NPT port. The fitting handles a maximum operating pressure of 175 psi at 150 degrees F.

Suited for offset pipe connections in drainage

This coupling suits installers who need to join different pipe sizes while maintaining bottom alignment for drainage flow. It is not for systems requiring higher pressure ratings or different material compatibility.

Class 125 pressure rating at 150 degrees F

The Class 125 designation confirms a 175 psi maximum operating pressure at 150 degrees F. Verify that your system design stays within this pressure and temperature limit before installation.

Highlights

  • Cast iron construction handles 175 psi at 150 °F
  • Class 125 rating suits Schedule 40 piping systems
  • Eccentric design keeps pipe centres aligned for smooth flow
  • Female NPT threads on both ends enable direct connection
  • Anvil model 0300154002 built for drain and trap installations

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0300154002

Questions about this item

What size NPT pipe threads must the existing pipework have to accept this 1-1/2" x 3/4" eccentric reducer?

Both ends use female NPT threads; one side fits 1-1/2" Schedule 40 pipe and the other fits 3/4" Schedule 40 pipe.

Can this Class 125 cast iron coupling stay in a line that also contains older galvanised steel fittings?

Yes, the NPT threads are compatible with standard iron or steel pipe threads of the same nominal sizes.

After installation, how can I confirm the joint is holding its 175 psi rating at 150 degrees F?

Pressurise the system to the working pressure and inspect the threads for leaks; a dry joint at test pressure shows it is seated correctly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.