We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast iron reducing tee with three female NPT ports

Anvil

Anvil 0300047008 Cast Iron Reducing Tee trap

SKU CH-C1WS-H334V MPN 0300047008

Cast iron reducing tee with three female NPT connections rated for 175 psi at 150 °F

  • TypeDrain Components
  • Cast iron construction resists corrosion for long service life
  • Class 125 rating handles 175 psi at 150 °F operating conditions
  • Schedule 40 compatibility fits standard piping systems
  • Three female NPT ports simplify threaded connections
  • Reducing tee design joins 2 in, 2 in and 1/2 in lines in one fitting

2 in Cast Iron Reducing Tee

This cast iron reducing tee joins two 2 in female NPT ports with a 1/2 in female NPT branch. It is rated for Class 125 service and Schedule 40 piping. The fitting handles a maximum operating pressure of 175 psi at 150 degrees F. It suits plumbing and hydronic systems that require a durable branch connection.

Installers needing a 1/2 in branch on 2 in mains

Contractors running 2 in Schedule 40 iron pipe who need a small-diameter take-off will find this tee matches the required pressure class and thread standard. It is not intended for systems that exceed the 175 psi rating or that use a different thread type or pipe schedule.

Black cast iron finish with NPT threads

The black coating provides basic corrosion resistance during storage and installation. Female NPT threads on all three ports allow direct assembly with standard Schedule 40 nipples and fittings without adapters. The Class 125 rating confirms compatibility with common low-pressure piping designs.

Highlights

  • Cast iron construction resists corrosion for long service life
  • Class 125 rating handles 175 psi at 150 °F operating conditions
  • Schedule 40 compatibility fits standard piping systems
  • Three female NPT ports simplify threaded connections
  • Reducing tee design joins 2 in, 2 in and 1/2 in lines in one fitting

Specifications

TypeDrain Components
BrandAnvil
Model0300047008

Questions about this item

What pipe schedule must the existing lines be to thread this 2 in × 2 in × 1/2 in reducing tee?

The tee is rated for Schedule 40 pipe, so all three connections expect that wall thickness.

Will the Class 125 rating handle the same pressure as the 175 psi maximum marked on the body?

Class 125 defines the flange standard; the 175 psi @ 150 °F limit is the actual pressure ceiling for this fitting.

After installation, how can I confirm the joint is holding at the rated 175 psi?

Pressurise the system to its working pressure and inspect the three NPT threads for leaks; no weep means the seal is sound.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.