We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron reducing tee with three female NPT ports

Anvil

Anvil 0300044005 Cast Iron Reducing Tee Class 125 1-1/2 in NPT

SKU CH-FBPD-YJWG8 MPN 0300044005

Cast iron reducing tee with three female NPT ports rated Class 125 for 175 psi at 150 °F

  • TypeDrain Components
  • MaterialHAWA
  • Cast iron construction resists corrosion for long service life
  • Class 125 rating handles 175 psi at 150 °F operating conditions
  • Reducing tee connects 1-1/2 in, 1 in and 1-1/2 in NPT female threads
  • Schedule 40 compatibility suits standard piping installations
  • Anvil 0300044005 model ensures consistent manufacturing quality

Anvil Cast Iron Reducing Tee

The Anvil 0300044005 is a Class 125 cast iron reducing tee designed for Schedule 40 piping systems. It provides a 1-1/2 inch NPT female inlet with 1 inch and 1-1/2 inch NPT female outlets. This fitting suits plumbers and contractors joining dissimilar pipe diameters in drainage installations.

Installation and Common Issues

The female NPT threads accept standard Schedule 40 pipe without special tools beyond pipe wrenches and thread sealant. Leaks typically occur when sealant is insufficient or threads are cross-threaded during assembly. Cast iron requires careful alignment to prevent stress fractures on the hub.

Pressure Rating and Application Limit

The fitting carries a maximum operating pressure of 175 psi at 150 degrees Fahrenheit. This rating determines suitability for low-pressure drainage and vent lines rather than high-pressure supply systems. Exceeding this limit risks joint failure and water damage.

Highlights

  • Cast iron construction resists corrosion for long service life
  • Class 125 rating handles 175 psi at 150 °F operating conditions
  • Reducing tee connects 1-1/2 in, 1 in and 1-1/2 in NPT female threads
  • Schedule 40 compatibility suits standard piping installations
  • Anvil 0300044005 model ensures consistent manufacturing quality

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0300044005

Questions about this item

How can I confirm the reducing tee is seated correctly after threading it onto Schedule 40 pipe?

Check for snug NPT engagement on all three ports — 1-1/2 in, 1 in, and 1-1/2 in — with no visible gaps; the cast iron Class 125 body should sit flush and hold 175 psi at 150 °F without weeping.

What comes with the Anvil 0300044005 tee and what must I supply?

The box contains only the cast iron reducing tee itself; you must provide Schedule 40 pipe, NPT thread sealant or tape, and any required hangers or supports.

Which size combination should I select for a 1-1/2 in main line dropping to a 1 in branch?

Choose the 1-1/2 in x 1 in x 1-1/2 in NPT configuration listed for this model; it matches a 1-1/2 in main with a 1 in reducing outlet.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.