We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast iron reducing tee with three female NPT ports

Anvil

Anvil 0300042801 Cast Iron Reducing Tee Class 125 Trap

SKU CH-R8WA-P2E26 MPN 0300042801

Cast iron reducing tee 0300042801 with three female NPT ports rated for 175 psi at 150°F

  • TypeDrain Components
  • Cast iron construction resists corrosion
  • Class 125 rating handles 175 psi at 150°F
  • Schedule 40 compatibility fits standard piping
  • Three female NPT ports simplify connections
  • Reducing design joins 1 1/2 in and 1/2 in lines

Cast Iron Reducing Tee Class 125

The Anvil 0300042801 is a black cast iron reducing tee rated Class 125 for Schedule 40 piping. It provides three female NPT connections sized 1-1/2 in, 1-1/2 in and 1/2 in for drainage system branching.

Sustained Pressure Rating

The fitting withstands 175 psi at temperatures up to 150 degrees Fahrenheit, maintaining seal integrity under continuous operating conditions rather than only short test bursts. Class 125 construction supports long-term service in residential and light commercial drain lines.

Installation Notes

Threaded NPT ends accept standard pipe dope or tape for joint sealing without specialised tools. The 1/2 in outlet may restrict flow if used for high-volume discharge, so verify drainage capacity before final assembly.

Highlights

  • Cast iron construction resists corrosion
  • Class 125 rating handles 175 psi at 150°F
  • Schedule 40 compatibility fits standard piping
  • Three female NPT ports simplify connections
  • Reducing design joins 1 1/2 in and 1/2 in lines

Specifications

TypeDrain Components
BrandAnvil
Model0300042801

Questions about this item

How much heat can the Anvil 0300042801 reducing tee handle during continuous operation?

The fitting is rated for a maximum operating temperature of 150 degrees Fahrenheit at its 175 psi pressure limit.

What pipe schedule and thread type must the installer provide for this tee to seal properly?

It requires Schedule 40 pipe with 1-1/2 inch and 1/2 inch female NPT threads on each branch.

Will this Class 125 cast iron tee thread directly onto older NPT pipe already in the system?

Yes, all three outlets use standard female NPT threads compatible with existing Schedule 40 iron pipe.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.