We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast iron reducing tee trap with three female NPT ports

Anvil

Anvil 0300040201 Cast Iron Reducing Tee Trap Class 125

SKU CH-ZAZZ-7QYKH MPN 0300040201

Cast iron reducing tee with three female NPT connections rated Class 125 for 175 psi at 150°F

  • TypeDrain Components
  • Cast iron construction handles 175 psi at 150 °F
  • Class 125 rating suits Schedule 40 piping systems
  • Reducing tee connects 1-1/4 in, 1 in and 1-1/4 in FNPT ports
  • Female NPT threads on all three outlets simplify installation
  • Durable black finish resists corrosion in plumbing applications

Product identity

The Anvil 0300040201 is a cast iron reducing tee trap rated Class 125 for Schedule 40 pipe. It connects three female NPT ports sized 1-1/4 in, 1 in, and 1-1/4 in for drainage reconfiguration.

Build and connections

The black cast iron body handles up to 175 psi at 150 degrees F and uses threaded NPT joints that seal with pipe tape or compound. The reducing layout lets plumbers step down a branch line without adding a separate reducer fitting.

Pressure and temperature limits

Class 125 rating and the stated 175 psi maximum at 150 degrees F define the safe operating envelope for hot or pressurised drain systems. Exceeding either limit risks joint failure or casting stress.

Highlights

  • Cast iron construction handles 175 psi at 150 °F
  • Class 125 rating suits Schedule 40 piping systems
  • Reducing tee connects 1-1/4 in, 1 in and 1-1/4 in FNPT ports
  • Female NPT threads on all three outlets simplify installation
  • Durable black finish resists corrosion in plumbing applications

Specifications

TypeDrain Components
BrandAnvil
Model0300040201

Questions about this item

What Class 125 pressure rating does the cast iron reducing tee handle?

The tee is rated for 175 psi at 150 degrees Fahrenheit maximum operating pressure.

Which pipe schedule must match the 1-1/4 inch and 1 inch FNPT connections?

The reducing tee is designed for Schedule 40 pipe on all three female NPT ports.

How do you seal the NPT threads on this cast iron tee during installation?

Apply PTFE tape or pipe dope to the male threads before tightening into the female NPT ports; the common mistake is skipping thread sealant and relying on the taper alone.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.