We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil 1 inch cast iron tee Class 125 three female NPT ports

Anvil

Anvil 0300032000 1" FNPT Cast Iron Tee Class 125 trap

SKU CH-DAZS-SN5XR MPN 0300032000

Cast iron tee with three 1-inch female NPT ports rated Class 125 for Schedule 40 piping

  • TypeDrain Components
  • MaterialHAWA
  • 1" FNPT cast-iron tee connects three female NPT lines
  • Class 125 rating handles 175 psi at 150 °F
  • Designed for Schedule 40 piping systems
  • Durable cast-iron construction resists corrosion
  • Three equal 1" FNPT outlets simplify trap assemblies

Anvil Cast Iron Tee 1" FNPT

The Anvil 0300032000 is a Class 125 cast iron tee designed for drainage systems. It features three 1-inch female NPT connections for joining pipe segments in plumbing installations.

Suits installers using Schedule 40 pipe

This tee fits standard Schedule 40 piping with 1-inch NPT threads. It is not intended for systems requiring higher pressure classes, different thread standards, or pipe sizes other than 1 inch.

Rated for 175 psi at 150°F

The fitting handles a maximum operating pressure of 175 psi at temperatures up to 150 degrees Fahrenheit. It is not rated for service conditions exceeding these pressure or temperature limits.

Highlights

  • 1" FNPT cast-iron tee connects three female NPT lines
  • Class 125 rating handles 175 psi at 150 °F
  • Designed for Schedule 40 piping systems
  • Durable cast-iron construction resists corrosion
  • Three equal 1" FNPT outlets simplify trap assemblies

Specifications

TypeDrain Components
MaterialHAWA
BrandAnvil
Model0300032000

Questions about this item

What pipe schedule and thread size must my existing piping have to connect to the 1 in FNPT ends on this Anvil 0300032000 tee?

The tee is made for Schedule 40 pipe and has 1 in Female NPT threads on all three ports, so your piping must match that schedule and thread standard.

Can I join this Class 125 cast iron tee to older steel or brass fittings that also use 1 in NPT threads?

Yes, the 1 in Female NPT threads follow the same taper standard used on older steel or brass fittings, allowing a direct threaded connection.

How can I confirm the tee is holding pressure correctly after installation?

Pressurise the system up to the rated 175 psi at 150 °F and check all three joints for leaks; a tight, dry joint indicates proper sealing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.