We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast iron 90-degree elbow with threaded ends

Anvil

Anvil 0300014008 90° Elbow 1-1/2 x 1/2 NPT Iron

SKU CH-DVM4-08BP8 MPN 0300014008

A 90-degree threaded elbow connects 1-1/2 and 1/2 inch pipes using black cast iron rated for 175 psi WOG and 125 psi steam

  • TypeDrain Components
  • 90-degree turn connects 1-1/2 to 1/2 NPT
  • Black cast iron handles 175 psi WOG at 150 F
  • UL listed and FM approved for fire protection
  • ASME B16.4 compliant for potable water in CA and VT
  • Class 125 rating suits saturated steam to 125 psi

Anvil 90° Elbow 1-1/2 x 1/2 NPT

This Anvil 90° elbow connects 1-1/2 inch and 1/2 inch NPT threaded pipes in plumbing and fire protection systems. The black cast iron fitting carries UL listing and FM approval for inspected equipment rosters. It meets ASME B16.4 standards for Class 125 service.

Suited for potable water and fire lines

Installers working on potable water systems in California or Vermont can use this certified fitting. It handles water, oil or gas up to 175 psi and saturated steam up to 125 psi. Builders needing copper, plastic or larger diameter connections should select alternative materials.

Pressure headroom to 175 psi WOG

The fitting operates reliably from -20 to 150 °F in water, oil or gas service at 175 psi. Saturated steam duty is rated at 125 psi within the same temperature span. Systems exceeding these pressures or requiring higher temperature steam will need a higher class fitting.

Highlights

  • 90-degree turn connects 1-1/2 to 1/2 NPT
  • Black cast iron handles 175 psi WOG at 150 F
  • UL listed and FM approved for fire protection
  • ASME B16.4 compliant for potable water in CA and VT
  • Class 125 rating suits saturated steam to 125 psi

Specifications

TypeDrain Components
BrandAnvil
Model0300014008

Questions about this item

What size NPT threads must the connecting pipes have to fit the 1-1/2 x 1/2 inch elbow?

The elbow has 1-1/2 inch and 1/2 inch NPT threaded connections. Both mating pipes must match these exact thread sizes for a proper seal.

Will the black cast iron construction and 175 psi WOG rating handle the same pressures as my existing Class 125 steel piping?

Yes, the fitting meets ASME B16.4 Class 125 standards with a 175 psi WOG rating at -20 to 150 deg F, matching Class 125 system requirements.

How can I verify the elbow is correctly installed and approved for potable water use in California?

Check for UL Listed and FM Approved markings on the casting. The fitting is certified for potable water applications in CA and VT per the compliance standard.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.