We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black zinc-alloy splitters with F-ports on a horizontal bar

Antronix

Antronix CMC2002H 2-Way Splitter 5-Pack -3.5dB 5-1002 MHz

SKU CH-2BNH-FS1NT

Pack of five two-way splitters covering 5 to 1002 MHz with 3.5 dB loss per port and 40 dB isolation

  • ColorBlack
  • Weight0.8
  • Five splitters in one pack simplify multi-room installs
  • 5-1002 MHz bandwidth supports current and future services
  • 3.5 dB insertion loss keeps signal strong on each port
  • Zinc alloy housing with nickel plating resists corrosion
  • SCTE compliant F-ports with 15 psi seal block water ingress

2-Way Splitter 5-Pack

The Antronix CMC2002H is a horizontal two-way splitter supplied in a pack of five units. Each unit divides a single coaxial input into two outputs for distributing broadband signals. The splitters operate across a 5-1002 MHz bandwidth and are built with zinc alloy diecast housings and proprietary nickel alloy plating for corrosion resistance. They are designed for digital broadcast and HDTV applications.

Installers needing multiple drop points

This pack suits technicians deploying multiple splits in residential or commercial coaxial networks where consistent 3.5 dB insertion loss per port is acceptable. Buyers who need a different split ratio, lower insertion loss, or a single unit rather than a five-pack should look at alternative configurations. The 1-inch port spacing fits standard structured wiring panels but may not suit ultra-compact enclosures.

1 GHz bandwidth with 3.5 dB loss

Each splitter handles frequencies up to 1002 MHz with minimal insertion loss, supporting current video, data and telephony services. The 40 dB port-to-port isolation in the return band prevents high-power modem signals from distorting neighbouring ports. Surge protection rated at 6 kV ring wave and SCTE compliant F-ports rated to 15 psi provide headroom against transients and environmental ingress.

Highlights

  • Five splitters in one pack simplify multi-room installs
  • 5-1002 MHz bandwidth supports current and future services
  • 3.5 dB insertion loss keeps signal strong on each port
  • Zinc alloy housing with nickel plating resists corrosion
  • SCTE compliant F-ports with 15 psi seal block water ingress

Specifications

BrandAntronix
ColorBlack
Weight0.8

Questions about this item

Does this splitter need external power or any extra hardware to operate?

No, it is a passive 2-way splitter that connects directly to coaxial cables and requires no power supply or additional equipment.

Will it work with my existing cable modem and set-top boxes that use standard F-connectors?

Yes, the 1-inch port spacing and SCTE-compliant F-ports accept standard coaxial cables used by cable modems, set-top boxes and TVs.

How can I confirm the splitter is performing correctly after installation?

Check that each connected device receives a clean signal with low insertion loss across the 5-1002 MHz range and that port-to-port isolation meets the 40 dB specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.