We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PTFE valve stem packing coil 10 ft

Anti-Seize

Anti-Seize 19155 Valve Stem Packing 10 ft PTFE

SKU CH-2EGE-HC4WB MPN 19155

PTFE valve stem packing rated to 500 psi, 500 °F and pH 0–14 in a 10 ft coil

  • TypeDrain Components
  • MaterialPTFE
  • ColorTransparent
  • Handles extreme heat up to 500 °F in steam and ambient conditions
  • Withstands full chemical range from pH 0 to 14
  • PTFE construction provides reliable sealing for valve stems
  • FDA-approved material meets food-grade safety standards
  • 10-foot continuous length reduces joints and potential leak paths

Valve Stem Packing PTFE 10 ft

This valve stem packing comes as a ten-foot coil of PTFE material. It is designed to seal valve stems in fluid-handling systems. The packing carries FDA approval and suits industrial or commercial plumbing maintenance. Buyers receive a continuous length that can be cut to fit individual glands.

Suits high-temperature chemical service.

The packing withstands temperatures from minus four hundred to five hundred degrees Fahrenheit and pressures up to five hundred psi across the full pH range zero to fourteen. It is aimed at maintenance engineers who need a single material for steam, corrosive chemicals and food-grade lines. Installers looking for inexpensive fibre or graphite rope for ambient water service should consider other options.

5/32 square inch cross-section decides gland fit

The packing’s cross-section measures five thirty-seconds of a square inch, which determines whether it fills the specific stuffing box. Match this dimension to the gland depth and stem diameter before ordering. No other size is offered in this listing.

Highlights

  • Handles extreme heat up to 500 °F in steam and ambient conditions
  • Withstands full chemical range from pH 0 to 14
  • PTFE construction provides reliable sealing for valve stems
  • FDA-approved material meets food-grade safety standards
  • 10-foot continuous length reduces joints and potential leak paths

Specifications

TypeDrain Components
MaterialPTFE
ColorTransparent
BrandAnti-Seize
Model19155

Questions about this item

What is the maximum operating temperature for this PTFE valve stem packing?

The packing handles ambient and steam temperatures up to 500 degrees F and down to -400 degrees F.

How much heat does the packing generate during continuous high-pressure valve service?

PTFE packing creates minimal frictional heat; the material is rated for 500 psi valve pressure and 500 degrees F steam without active cooling.

What shaft size does the 5/32 square-inch cross-section packing fit?

The 5/32 sq in cross-section is designed for standard 5/32-inch shaft diameters in valve stem applications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.