We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal ASIC miner with front grille and side handles

ANT-ZEN

ANT-ZEN Antminer L7 9.3Gh Scrypt ASIC Miner handheld pcs accessory

SKU CH-KBQT-BKDB6

Scrypt ASIC miner delivers 9.3 Gh/s at 3425 W and requires 220 V input

  • Scrypt mining at 9.3 Gh/s maximum hashrate
  • 9300 Mh/s peak performance for Dogecoin and Litecoin
  • 3425 W power draw at full load
  • Compatible with NiceHash, Poolin and AntPool
  • Requires 220 V input voltage for safe operation

Antminer L7 Scrypt ASIC Miner

The Antminer L7 is a Bitmain-built ASIC miner designed for the Scrypt algorithm. It delivers a maximum hashrate of 9300 Mh/s while drawing 3425 W of power. The unit requires a 220 V input voltage to operate correctly. It is intended for miners targeting Dogecoin and Litecoin rewards.

Suited for dedicated Scrypt mining operations

This hardware fits operators who run a 220 V supply and can provide 3425 W of continuous power. It connects to pools such as NiceHash, Poolin and AntPool. Buyers without access to 220 V infrastructure or sufficient cooling capacity should consider other options. The form factor is not compatible with standard PC builds or handheld devices.

220 V input voltage requirement

Supplying the correct 220 V input is the single specification that determines whether this miner will function without damage. An incorrect voltage will probably cause permanent hardware failure. Verify your electrical installation matches this requirement before purchase. No other voltage range is supported.

Highlights

  • Scrypt mining at 9.3 Gh/s maximum hashrate
  • 9300 Mh/s peak performance for Dogecoin and Litecoin
  • 3425 W power draw at full load
  • Compatible with NiceHash, Poolin and AntPool
  • Requires 220 V input voltage for safe operation

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the Antminer L7 9.3Gh to 220V power without damaging the unit?

Use a dedicated 220V circuit rated for at least 3425W, plug the supplied PSU cables directly into the miner’s power sockets, and verify polarity before switching on; an incorrect voltage will likely destroy the hardware.

Which parts of the Antminer L7 9.3Gh will need replacement after months of continuous mining?

The cooling fans and hash-board thermal paste degrade first; plan to swap fans every six to twelve months and re-paste the ASICs when temperatures rise above normal operating range.

At what point does the 3425W power draw become the limiting factor during sustained Scrypt mining?

The 3425W ceiling is reached immediately at full 9300Mh/s load, so your electrical supply and cooling capacity — not the chip — set the practical limit for continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.