We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ancel PB100 circuit probe in a rectangular case with a 20ft cable and probe tip

Ancel PB100 12-24 VDC Circuit Probe 20ft Cable

SKU CH-330H-7VFF5

Tests 12-24 VDC circuits with voltage, resistance and diode modes plus component activation, supplied with a 20 ft extension cable

  • FeaturesProbe Circuit Tester; 20ft Extension Cable; Probe Tip; Batte
  • Height10.2 L x 8.7 W x 2.9 H inches
  • Width10.2 L x 8.7 W x 2.9 H inches
  • Length10.2 L x 8.7 W x 2.9 H inches
  • Weight2.65 pounds
  • Sports Team1 Piece
  • All-in-one tester covers 12-24 VDC systems
  • 20 ft extension cable reaches distant circuits
  • Four modes include DC volts, AC volts, resistance, diode
  • Component activation tests injectors, fans, windows directly
  • 1 V resolution with min/max capture and tone alert

Ancel PB100 12-24 VDC Circuit Probe

The Ancel PB100 is a handheld circuit tester built for 12 V and 24 V vehicle electrical systems. It suits professional technicians and DIY owners who need to diagnose power, ground and continuity faults on cars, trucks or trailers. The tool combines voltage, resistance and diode checks in a single probe, replacing several separate meters for faster fault finding.

20 ft extension cable and battery hookup clip

A 20 ft extension cable lets the probe reach circuits around the whole vehicle while the main unit stays at the battery. The included hookup clip connects directly to battery terminals or a cigarette-lighter socket for power, so no separate supply is needed. These accessories turn the tester into a self-contained kit for roadside or workshop use.

12-24 VDC operating range limits use

The probe only works on 12 V and 24 V DC circuits, so it cannot test mains-voltage wiring or high-voltage hybrid and electric-vehicle batteries. Its 0.1 V resolution suits automotive sensors and actuators but is too coarse for precision electronics work. Buyers needing CAT III safety ratings or AC mains measurement must choose a different instrument.

Highlights

  • All-in-one tester covers 12-24 VDC systems
  • 20 ft extension cable reaches distant circuits
  • Four modes include DC volts, AC volts, resistance, diode
  • Component activation tests injectors, fans, windows directly
  • 1 V resolution with min/max capture and tone alert

Specifications

BrandAncel
FeaturesProbe Circuit Tester; 20ft Extension Cable; Probe Tip; Battery Hookup Clip; Box, Vehicle 12v/24v Battery Power Supply Or Ci-garette Lighter Power Supply; 24/7 Assistance Via Amazon @ Ancelt Ech C Om., false
Height10.2 L x 8.7 W x 2.9 H inches
Width10.2 L x 8.7 W x 2.9 H inches
Length10.2 L x 8.7 W x 2.9 H inches
Weight2.65 pounds
Sports Team1 Piece
TypeMultimeter, Voltmeter, Ohmmeter, Diode Tester

Questions about this item

How often will the probe tip or 20ft extension cable need replacement?

The probe tip and 20ft extension cable are built for repeated automotive use; replace them only if the tip becomes worn or the cable insulation shows damage.

What measurement limit is reached first during continuous testing?

The 0.1V resolution sets the smallest readable change, so very small voltage fluctuations may not register during sustained diagnostics.

How much heat or noise does the tool produce when powered from a 12-24V battery all day?

The unit draws power directly from the vehicle battery or cigarette lighter and operates silently with no measurable heat buildup during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.