Analog Technologies, Inc.
Analog Technologies, Inc. AHV12V500V10MAW 12V 500V 10mA industrial power supply
Converts 12 V input to adjustable 0–500 V output at up to 10 mA for precision high-voltage industrial applications
- TypeLinear Power Supplies
- Voltage500V
- Amps10mA
- Delivers stable 0-500 V output for sensitive industrial equipment
- Precise 5 V ±0.05 V reference protects against power fluctuations
- Compact metal enclosure enables easy integration into existing systems
- Wide 140-600 mA input range suits variable 12 V sources
- Electronic shutdown control adds safety for high-voltage applications
12 V Input High-Voltage Module
The AHV12V500V10MAW is a DC-DC linear power supply that converts a 12 V source into an adjustable 0–500 V output. It is built for engineers and technicians who need a compact high-voltage source for scientific or industrial equipment. The metal enclosure provides shielding and heat dissipation without external cooling.
10 mA Output with 0–5 V Control
The unit delivers up to 10 mA from 0 to 500 V, with the output voltage proportional to a 0–5 V control signal. Input current ranges from 140 mA to 600 mA depending on load. Headroom is sufficient for capillary electrophoresis, electrospinning or X-ray sources, but the 10 mA limit rules out high-current processes such as magnetron sputtering or particle accelerators.
5 V ± 0.05 V Reference Stability
The internal reference holds 5 V ± 0.05 V, which sets the absolute accuracy of the high-voltage output. If your application demands tighter voltage tolerance than this reference provides, the module is not the right choice.
Highlights
- Delivers stable 0-500 V output for sensitive industrial equipment
- Precise 5 V ±0.05 V reference protects against power fluctuations
- Compact metal enclosure enables easy integration into existing systems
- Wide 140-600 mA input range suits variable 12 V sources
- Electronic shutdown control adds safety for high-voltage applications
Specifications
| Type | Linear Power Supplies |
|---|---|
| Voltage | 500V |
| Amps | 10mA |
Questions about this item
Will this module work with my existing 12 V bus that can vary by about a volt?
The unit accepts an input of 12 V ± 1 V, drawing 140 mA to 600 mA, so it operates normally across that range.
How do I verify the output is regulating correctly after installation?
Apply a 0–5 V control signal; the output should track 0–500 V proportionally, and the 5 V reference pin must read 5 V ± 0.05 V.
What comes in the box and what must I source separately?
The module itself is supplied; you must provide a 12 V source capable of up to 600 mA, a 0–5 V control voltage, and any high‑voltage wiring or connectors for the 500 V output.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
