We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey enclosure with 128 labelled compartments holding 0402 SMD capacitors

Analog Technologies

Analog Technologies C04-100 0402 SMD Capacitor Kit 70 Values 100pcs/Value

SKU CH-K5ZV-6MSV0

Kit holds 70 values of 0402 SMD capacitors, 100 pieces per value, pre-sorted in a 128-compartment enclosure

  • TypeSMD capacitor kit
  • 70 capacitance values from 0.5pF to 1.0uF cover diverse prototyping needs
  • 100 pieces per value ensure ample stock for production runs
  • All capacitors sourced from TDK for consistent quality
  • Patented 128-compartment enclosure with labelled lids enables second-level component retrieval
  • Compact 280×216×45mm case fits bench, shelf or mobile service kits

Professional SMT Capacitor Kit

This Analog Technologies C04-100 kit supplies 70 capacitance values in 0402 case size. All capacitors are sourced from TDK and come pre-sorted into a patented enclosure with 128 individually lidded and labelled compartments for immediate identification.

Technicians and prototype engineers

The enclosure measures 280 by 216 by 45 millimetres and each compartment is 22 by 15 by 16 millimetres, making it practical for bench work, shelving or transport. Buyers who need 0603, 0805 or 1206 sizes, or who require values outside the 0.5 picofarad to 1.0 microfarad range, should look at other kits.

0.5 picofarad to 1.0 microfarad range

Capacitance spans from 0.5 picofarad up to 1.0 microfarad with tolerances of ±0.25 picofarad or ±5% to ±10%. This range determines whether the kit covers the specific values required for a given circuit design or rework task.

Highlights

  • 70 capacitance values from 0.5pF to 1.0uF cover diverse prototyping needs
  • 100 pieces per value ensure ample stock for production runs
  • All capacitors sourced from TDK for consistent quality
  • Patented 128-compartment enclosure with labelled lids enables second-level component retrieval
  • Compact 280×216×45mm case fits bench, shelf or mobile service kits

Specifications

TypeSMD capacitor kit

Questions about this item

What PCB footprint and soldering tools do I need to use these 0402 capacitors?

The capacitors use the 0402 footprint measuring 1.0 x 0.5 mm. You will need a fine-tip soldering iron or hot-air station, tweezers, and magnification to place and solder them reliably.

Can I mix these 0402 capacitors with 0603 or 0805 parts on the same board?

Yes, different case sizes can share a board, but each value must use its correct footprint — 0402 parts go on 0402 pads, 0603 on 0603 pads, and 0805 on 0805 pads.

How do I verify a capacitor from the kit matches the value printed on its compartment lid?

Each of the 128 compartments is labeled with capacitance, material, voltage, and tolerance. Measure the part with an LCR meter and compare the reading to the lid markings.

More in Passive Components

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.