Ampco
Ampco WS-1811 Striking Wrench 1-13/16 in 10 in
Non-sparking striking wrench with a 1-13/16 inch head and 10 inch overall length for safe use in hazardous environments
- Non-sparking safety for hazardous environments
- 1-13/16 inch opening fits large SAE fasteners
- 10 inch length provides strong striking leverage
- Aluminium-bronze alloy resists corrosion and wear
- Tether-ready design prevents drops at height
Ampco WS-1811 Striking Wrench Specs
This Ampco WS-1811 striking wrench is a non-sparking hand tool built for industrial maintenance. Its aluminum-bronze construction resists corrosion and prevents ignition in hazardous environments. The straight head measures 1-13/16 in across with a 1 in thickness. Overall length reaches 10 in for controlled leverage.
Best For Hazardous-Area Maintenance
Mechanics working near flammable vapours or chemicals benefit from the non-sparking alloy. The tether-capable design adds drop protection when working at height. Technicians needing ratcheting action or a slim profile for tight clearances should consider other wrench styles.
Critical Fit: 1-13/16 in Head Size
The 1-13/16 in opening is the single dimension that determines compatibility with your fastener. Verify the nut or bolt head matches this SAE size before ordering. No other specification overrides this fit requirement.
Highlights
- Non-sparking safety for hazardous environments
- 1-13/16 inch opening fits large SAE fasteners
- 10 inch length provides strong striking leverage
- Aluminium-bronze alloy resists corrosion and wear
- Tether-ready design prevents drops at height
Specifications
| Brand | AMPCO SAFETY TOOLS |
|---|
Questions about this item
What size fastener does the 1-13/16 in head fit?
The head is sized for SAE fasteners measuring 1-13/16 inches across the flats.
How much clearance does the 10 in overall length need in a tool bag?
The wrench measures approximately ten inches end to end and one inch thick at the head.
What is the correct way to strike this wrench without damaging the head?
Use a hammer on the striking face only; do not hit the open jaw or use a steel hammer on the bronze alloy.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
